Turbo LS fbody partout (127lb injectors,s475,hotside,magnefuel,filters etc)
#1
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2006
Location: lakeland floirda
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Turbo LS fbody partout (127lb injectors,s475,hotside,magnefuel,filters etc)
Category: Accessories
Price: $3
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): FL
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
This summer i pulled my forged motor/88mm combo out to to find it was damaged and i sold it. Replacing that was this SBE 5.3 with a t6 s475 combo which i made a total of 2 full passes on and 2 hours dyno time. The setup ran 6.4/109mph on 14lbs and 60' 1.28 on 18lbs but i never made a full pass. It put down 700rwhp on a unloaded dynojet dyno at 18.5lbs. Honestly i just lost interest, i dont have a trailer anymore to go to the track and i bought a mint 02 ws6 that i would rather pay off then to have two cars. So anyways heres stuff i have for sale. Ill have alot more as i pull it off the car and picture it. (Will have a ls6 intake,aeromotive rails/regulator,cold side,motor for example)
First-
FIC 127lb hr high impedacne injectors for ls1 style intakes. These will make over 1000rwhp on e85 and a **** ton on gas. These are rated for e85 and everytime ive used e85 ive drained the tank that night and flushed the system out with 114 race gas. Ive always been scared of leaving e85 in the car since one time i damaged a fuel system like that. Also on pumpgas these has a great idle at 60psi fuel pressure. ALSO I WILL INCLUDE THE INJECTOR DATA
700shipped.
http://www.fuelinjectorconnection.co...product_id=310
Second-
Magnafuel 4303 fuel pump-
this thing is a badbitch and is in perfect shape. Magna fuel states its a streetpump design that has the fuel run threw the pumpmotor which cools it. It has never skipped a beat and ive never had a fuel straving problem. Its rated for 2000+ horsepower and runs 20-120psi. I will also include a 8an in and out trick flow fuel filter that works great with it. Also the pump has the correct 8an male fittings on it.
400 plus shipped in the usa.
third-
A forced inductions S475 t6 1.32 ar turbo. It has about a hour total engine hours on it hoesnty. 1 dyno session and a couple 1/8th mile passes. Great shape. I will include the bigass RPS air filter also but does not include band clamp. i will try to sell the hotside later with it.
550 plus shipping.
fourth-
I figured even though its a homemade mig welded mild steel wrapped hotside someone might be interested in it. This is homemade and has a lot of couplers, but its a solid setup and makes great power. Ill sell my 6.0 manifolds, hot pipes, dual on3 44mm wastegates and complete coldside with a RPS 60mm blow off valve, 4inch thick big intercooler, the 5inch downpipe flange and band clamp for 650 plus shipping. Or i would do 1100 plus shipping for this and the turbo...
Last edited by BLINGOLE; 02-01-2015 at 03:57 PM.