wickdss

i need the piece that goes under the air lid. if anyone can help me out it would be greatly appreciated.

cody2kz28

you talking about the piece that goes in front of the radiator plastic piece that attaches down and direcects the air to the air box with a little slot in it if so i have one i will send you for 5+ shipping

Smoker_98

iTrader: (1)

Ive also got one $20 shipped.

ROCNDAV

iTrader: (100)

Are all three of you talking about the radiator support? The piece that the air lid clips to and the air filter tray sits in?

David

Toonz

iTrader: (6)

See attached image, which piece is it? I am actually looking for piece #4.

ROCNDAV

iTrader: (100)

Part number 4 (the filter tray) is GM PN 25166571 $41.47

Part number 6 (the radiator support) is GM PN 25170361 $59.30 (Gmpartsdirect.com)

I might be selling mine (and SLP lid) as I just found out that I might not be able to fit might lid under my 94 hood unless I convert to the newer 98~02 LS1 Front end body style.

David

Toonz

iTrader: (6)

$41 for that!!! I think I'll be making my own... thanks for the part numbers though!

ROCNDAV

iTrader: (100)

Yup, and thats at gmpartsdirect.com, your local dealer may be closer to MSRP, my dealers always charge MSRP here in So Cal I could have sworn a couple of months ago, I looked up that parts and it was only $6 or so dollars.

David

cgworth

iTrader: (11)

I have part 4 for $20 shipped

jeremyferguson

Is anybody selling part #6 on that diagram, the radiator support. I'm gonna do the ls1 style induction with clear air lid on the 'ole lt1....

grabbin gears, I may be interested in part#4 if you still have it.

Jeremy

jeremyferguson

Let me know if you sell yours. I'm definitely interested.

ROCNDAV

iTrader: (100)

Will the LS1 style lid & radiator support even fit under the hood of a 93~97 Camaro? Somone on this board told me that they dont think it would, which is a bummer for me since I already have the pieces. I was looking at some pictures of the beta 1997 Cormaros (LS1 test mules) and they seem to use a corvette style air intake rather than the LT1 or LS1 instakes tubes.

Has anyone successfully mounted a 98~02 air lid & radiator support into a 93~97 F body (preferrably a Camaro)?

jeremyferguson

Yes, its definitely been done more than a few times. Its not a direct bolt-on, but I've seen it done quite a few times and it actually looks really good(along with the performance gains).

edit: I reread your post, and it won't fit under the stock hood unless you "clearance" the underside of the hood a bit, or get an "ultra Z" hood or the like.

ROCNDAV

iTrader: (100)

Thanks for the info.

jeremyferguson

here's what it looks like on an lt1:

ROCNDAV

iTrader: (100)

Sweet.

ls1birdman

iTrader: (1)

i have part #4 and #6 how much are u looking to spend for both parts..

jeremyferguson

how about 40 shipped?

Let me know.

Jeremy