need swap for stuff and buy stuff
#1
On The Tree
Thread Starter
iTrader: (11)
Join Date: Aug 2003
Location: west burbs of chi town
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
need swap for stuff and buy stuff
i need a bare block that is not cracked unlike mine(ls1` or ls6) also looking to swap anyone for the 6 speed harness and pcm for their a4 harness and pcm and i have the pedal assembly for the 6 speed if someone wants to swap pedals as well and i good cam right around 600 lift as well as 240 or better duration on a 112 lsa or even a 113 lsa thanks
#2
hello
I have a bare LS1 motor that only had like 45k miles, was going to rebuild it after changing motors to a 6.0l, but once it was all apart, I just gave up on the project I was planning and the parts have been sitting around. I'm looking for a 4l60e removable bellhousing type transmission for a 99+ new style truck and possible a transfer case np246.
#5
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blkmgc1
ttt......
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (11)
Join Date: Aug 2003
Location: west burbs of chi town
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
i had to reroute the crank and cam sensoe wires due to the headers melting it i had a shop re route it all nice and clean they have the wires wrapped up by themselves other than that nope it's in perfect condition came out of a 2000 ss i have the pedals as well so i would swap if ya want to also the wires for the vss nuetral safety and reverse lock out are wired by themselves because i was running a maual valve trans so i pulled them from the harness and wrapped them by themselves as well just to get them out from under the car so they did'nt get damaged if ya wanna swap let me know i will be out of town till tuesday some time so i will check when i get home thanks darrell