3k stall, low rpm knock!?
05-20-2011, 10:21 PM
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
3k stall, low rpm knock!? Had the stall about 2 years, input shaft on tranny is going bad - but can't afford to rebuild yet.
That said, is there anything that has worked in the past for making the engine not knock/rattle/whatever when low rpm high load situations occur except for a throttle blip?
say, 1500 rpm uphill. or 2k rpm level ground w/ ac on. just a rattle that i can't quite seem to place with VCM scanner, doesn't bring on KR in the logs but it damned sure isn't supposed to do that!!
I want the engine to run well again!!! lol.. HELP!
That said, is there anything that has worked in the past for making the engine not knock/rattle/whatever when low rpm high load situations occur except for a throttle blip?
say, 1500 rpm uphill. or 2k rpm level ground w/ ac on. just a rattle that i can't quite seem to place with VCM scanner, doesn't bring on KR in the logs but it damned sure isn't supposed to do that!!
I want the engine to run well again!!! lol.. HELP!
