Dave_the_SS

iTrader: (27)

What are a few options as far as a wideband that I can hook up to different cars with out splicing wires and all that. I seen the lm1 and lm2...... I considered the Lm2 basic kit but will it hook up to hptuners with put me having to buy all the extra fancy cables?

I'll be doing just basic street tunes and a few locals cars and my own not all these guys have widebands

robbyredneck

iTrader: (1)

i use the ngk and it's four wires, neg and switched 12v allready had terminals crimped and ground and signal out for hptuners required a small screwdriver. it takes roughly a thousand times longer to weld in the bung.

MontecarloDrag

iTrader: (3)

I have a LM-2 single channel. It comes with everything to hook it to HPT
Power comes from cig. lighter, so its easy to use it with different cars. I use it to tune

Dave_the_SS

iTrader: (27)

My things is I don't have the eio plug just the standard hptuners package

robbyredneck

iTrader: (1)

not gonna be easy. unless you upgrade your hptuners. that's what i would do if i was going to tune more than one car.

Dave_the_SS

iTrader: (27)

I've been considering it. But 249+ shipping........ Ouch

firemech21

iTrader: (9)

WTF dave, we need to figure something out for ur wideband.

Dave_the_SS

iTrader: (27)

Already gave u a solution to the problem steve.

DiabloFormula

iTrader: (58)

Upgrade to PRO and be done with it..thats what I did when I picked up my LM-2 wideband to tune with along with a Innovate tailpipe holder thingy.