Chassis dyno
#21
TECH Addict
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Heard nothing but horror stories about there dyno's. I rented one before and it was nothing but problems and it was brand new. If you search you will find ALOT of bad reviews, found way more bad than good. I have personally owned a dynojet 224x it worked flowless but was about worthless for tuning without the eddy brake. If I ever buy another dyno it will be a mustang dyno.
I was near ready to go with Dyno Com, then I took the time to call a few owner's within an approx. 500 mile radius.
Previous Land & Sea experience in the 2 stroke world ruled them out. I did call em up however.
DD was high on my list, they are expensive & were having financial issue's when I was shopping.
In the end I called Mustang, told them what I was looking to do & how much I was prepared to spend. They said they could do it within my budget, so I went that way. Turned out to be a ******* nightmare problem & I had to push way to hard in order to get them to first accept the problem then correct it.
Previous Land & Sea experience in the 2 stroke world ruled them out. I did call em up however.
DD was high on my list, they are expensive & were having financial issue's when I was shopping.
In the end I called Mustang, told them what I was looking to do & how much I was prepared to spend. They said they could do it within my budget, so I went that way. Turned out to be a ******* nightmare problem & I had to push way to hard in order to get them to first accept the problem then correct it.
#23
TECH Fanatic
iTrader: (5)
Join Date: Sep 2008
Location: Salem/Keizer
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I still have a few dynos for sale if anyone is interested. An all wheel drive "or could be split into 2 seperate dynos" I think the model was 248awd from dynojet. It is a 248 rear and 224 front. BARELY used, dont even have tire marks on the rollers.
And a mustang 250 with eddy. Both not used much.
I want to sell one or both. No hurry though.
And a mustang 250 with eddy. Both not used much.
I want to sell one or both. No hurry though.
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
#25
TECH Addict
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The only issue I experienced with the Land and Sea was the Kevlar belt connecting the front and rear rollers snapping...this seemed partially due to not having a guide. But it could also have been due to the dyno being installed improperly by the guys that did it. I know it snapped belts frequently when in AWD mode and usually on decell.