Swaie

iTrader: (6)

So how close are the Frost tunes people get...Do you have to go back in and tweek them or are they pretty much dead on...is this just a get it started after a build tune?

lemons12

iTrader: (71)

Mods for the tune he will be doing?

Swaie

iTrader: (6)

Right now the car is NA with a z06 cam with a 3200 stall. But soon I will be turbo'd. I want to see if I can pull a little more out of my na tune or should I go to a local shop with a dyno...

minytrker

iTrader: (13)

A good tuner should always be able to tune it better in person. With mail order there no way to get a/f 100% dialed in or timing. I'm sure frost will have it close but if your looking for every last bit then you need a tune in person.

lemons12

iTrader: (71)

Current mods it will be extremely close... With a FI setup it would be a get it running to test it out/drive to the tuner.

I have seen some tunes he does better than some "tuners" that do them with the car on a dyno.

Fbodyjunkie06

iTrader: (10)

This x2. He is very good about once you purchase your tune through him, if you need any help or have to have something changed, he can point you in the right direction or if you have a friend with HPT after he does the tune, he would probably walk you through what to do step by step.

You'll find with Frost that once you buy something from him, he will always be there to help and fix it. Now he is one of those vendors that stays so busy that if you haven't purchased something from him or bought from him, he won't be the guy that takes the time out of his day to walk you through it and help. Not saying he is a jerk, just a busy man that is very good at what he does. Some love him and some hate him for the last reason, but those that have used him rarely have anything bad to say.

ls1wallen

my 228R cam tune was dead on when I put it on the dyno. It had a frost tune on it

MUSTANGBRKR02

iTrader: (91)

Steve is the man.