100mm Maf screens?
100mm Maf screens? I have a customer's car that is a fresh build, but he has the older style TSP 100mm maf (the one without the screen). This car could really benefit from a screen, as the maf is reading all over the place at idle and part throttle.
I've called TSP...no luck there.
Does anyone know where I can source a suitable screen for this maf housing? I've read a few threads, and tried contacting saxonpc.com...but still no luck as of yet. I'm wanting the "honeycomb" style 4:1 cell ratio if possible....
Anyone??
I've called TSP...no luck there.
Does anyone know where I can source a suitable screen for this maf housing? I've read a few threads, and tried contacting saxonpc.com...but still no luck as of yet. I'm wanting the "honeycomb" style 4:1 cell ratio if possible....
Anyone??
Well, looks like Saxonpc.com came to the rescue after all! Jason even met me at 11pm to deliver the screens (I bought extras)!! Lucky for me that his is business is close to my home....talk about luck!
The screen fit PERFECTLY...but I decided to epoxy it in place for safe measure.
Anyway, just thought I'd post back here in case anyone else runs into this issue.
[IMG]
[/IMG]
[IMG]
[/IMG]
The screen fit PERFECTLY...but I decided to epoxy it in place for safe measure.
Anyway, just thought I'd post back here in case anyone else runs into this issue.
[IMG]
[/IMG][IMG]
[/IMG] That's a nicer looking screen than the GM 75mm
and 85mm pieces - much larger honeycomb size.
Do they make these to fit those MAFs?
An alternative could be to put a descreened MAF
further forward in the duct (away from the throttle
and reversion pulses).
and 85mm pieces - much larger honeycomb size.
Do they make these to fit those MAFs?
An alternative could be to put a descreened MAF
further forward in the duct (away from the throttle
and reversion pulses).
Yes, they're cut to a specific diameter and offer difference ratio/size honeycomb. Good price and ships asap.
As a side note, Jason even offered to exchange the screens for me if I was not happy.Apparently, he cuts these pieces himself....so I'd imagine that just about any size is available. Just give him a call to verify....very cool dude.
Can't say enough positive about him.....going WAY above and beyond for even a small sale. Really bailed me out!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
