kpeters59

I'll give that a shot.

Any clue which 'display type' is the one that displays Max and Min values? I just now ran through adding a new display and the type that does that doesn't jump off the screen...

Thanks,

-Kyle

fst100

iTrader: (5)

for the KR degrees im using the square shaped called "Half Dial (Needle)"

edit - the "Half Dial (Meter)" would also work, they're basically the same except the display type used, ones a needle the other uses a bar/meter

computerz

using Torque? I think the "half-dial" meters have min/max values.

fst100

iTrader: (5)

^ yes using torque app. the half dials has max/min values

computerz

You're fast! Well I guess with a name like fst100

fst100

iTrader: (5)

lol I subscribed to this post and I have my email opened so any notifications pops up.

kpeters59

Thanks, Y'all!

It turns out, that if I 'long press' the current display I get an option to set Min and Max values that I don't think were offered while setting up the display, so I edited that way. Is there a reason to set a MIN value?

This is all great and everything and I'm super glad that this is able to be read now, but, it seems to be indicating to me that Knock is not the reason my power sucks off-throttle. The last logs that were reviewed here on LS1Tech showed about 9 degrees of retard. If it's not coming from Knock, where is it coming from?

I'm about to drive back in towards town to get my mountain bike out of the shop (because it hasn't been warm enough to ride up 'til now?), so I'll give these gauges and logs a thorough workout.

Thanks,

-Kyle

Thanks,

-Kyle

fst100

iTrader: (5)

MIN set to zero cause you may get KR lower than 1*. 9*of KR would lower your timing advance so it'd be a dog slow during that time frame. is the pcm tuned?

kpeters59

Well, yeah. I guess that's what we'll call it...

It did really well on the dyno with the little cam I put in it.

But it wasn't a long time after that it started not running too good.

-Kyle

kpeters59

Torque decided not to log my trip back and forth to town, but I did capture this log a while ago. It's a 2 mile drive.

It doesn't seem to show any Spark Retard, but don't let that fool you! It's still running like ...it's running poorly...

-Kyle

computerz

Are you running cats? If so, could one of them be coming apart inside and restricting the exhaust? If you rap on each cat with a rubber mallet, if you hear loose pieces inside that could be the issue.

kpeters59

Nope...no cats...

-Kyle