HPT vcm suite 3.6 anyone using it yet?
#2
From what? 3.4?
Ive used 3.6 since it came out.
I don’t think it added any features for us.
Ive used 3.6 since it came out.
I don’t think it added any features for us.
If anything, I think they hosed the chart portion of the scanner. The traces don’t follow the table data.
3.7 beta is available as well
If you decide to update, copy what you have to a mem stick. Otherwise 3.6 will delete it for you.....
3.7 beta is available as well
If you decide to update, copy what you have to a mem stick. Otherwise 3.6 will delete it for you.....
#4
Thread Starter
Joined: Nov 2013
Posts: 6,332
Likes: 527
From: Portlandia
aaaaaand still no plan to bring the output feature of the EIO (enhanced input/OUTPUT) back
"Thank you for contacting support
We currently have no eta for the outputs to return, I believe the last version that supported them was 2.24"
screw it i'm going holley or MS as soon as I have the dough
"Thank you for contacting support
We currently have no eta for the outputs to return, I believe the last version that supported them was 2.24"
screw it i'm going holley or MS as soon as I have the dough
#7
RTT is very useful, I always use it to reduce flashes. I can tune a vehicle in a fraction of the time it takes without RTT
Regardless of that, RTT isn't the cause they removed EIO outputs since that is a feature of the scanner, completely isolated from the enhanced RTT OS. They simply have given it a low priority
Regardless of that, RTT isn't the cause they removed EIO outputs since that is a feature of the scanner, completely isolated from the enhanced RTT OS. They simply have given it a low priority
Trending Topics
#8
Thread Starter
Joined: Nov 2013
Posts: 6,332
Likes: 527
From: Portlandia
RTT has been really buggy for me and eats battery really fast.
but youre right--- i am just being a brat about it.
maybe if enough people who want to see the outputs email support they will bring it back.
send your email here:
support@hptuners.com
subject line: attn: William Henn MVPI Pro EIO output capability
copy and paste this message into the body:
Please bring back the user configurable outputs for the p01 and p59 computers. They are especially useful in creating boost by gear, staging nitrous and other traction and power control strategies.
but youre right--- i am just being a brat about it.
maybe if enough people who want to see the outputs email support they will bring it back.
send your email here:
support@hptuners.com
subject line: attn: William Henn MVPI Pro EIO output capability
copy and paste this message into the body:
Please bring back the user configurable outputs for the p01 and p59 computers. They are especially useful in creating boost by gear, staging nitrous and other traction and power control strategies.
#10
RTT has been really buggy for me and eats battery really fast.
but youre right--- i am just being a brat about it.
maybe if enough people who want to see the outputs email support they will bring it back.
send your email here:
support@hptuners.com
subject line: attn: William Henn MVPI Pro EIO output capability
copy and paste this message into the body:
Please bring back the user configurable outputs for the p01 and p59 computers. They are especially useful in creating boost by gear, staging nitrous and other traction and power control strategies.
but youre right--- i am just being a brat about it.
maybe if enough people who want to see the outputs email support they will bring it back.
send your email here:
support@hptuners.com
subject line: attn: William Henn MVPI Pro EIO output capability
copy and paste this message into the body:
Please bring back the user configurable outputs for the p01 and p59 computers. They are especially useful in creating boost by gear, staging nitrous and other traction and power control strategies.
#11
The external wideband gauge continues to read fine, but no movement at all on the HPTuners screens. Works fine for about 5-10 minutes, then freezes up...
If I do like you said you do, the old pull over and reflash, then it stays working/reading fine...
#12
Everytime I have tried using it, my wideband reading freezes up on the HPTuners, but not the actual gauge...
The external wideband gauge continues to read fine, but no movement at all on the HPTuners screens. Works fine for about 5-10 minutes, then freezes up...
If I do like you said you do, the old pull over and reflash, then it stays working/reading fine...
The external wideband gauge continues to read fine, but no movement at all on the HPTuners screens. Works fine for about 5-10 minutes, then freezes up...
If I do like you said you do, the old pull over and reflash, then it stays working/reading fine...
Histogram it is.
#13
#14
Idk, maybe hit or miss. My mpvi pro stopped working, i emailed support and with in 15 minutes a guy named William ( same as Bill i see around at times?) emailed me back. We went back and forth several times with questions and answers and he answered every time with in 15 minutes. I was very pleased and surprised with the email support.
#15
Idk, maybe hit or miss. My mpvi pro stopped working, i emailed support and with in 15 minutes a guy named William ( same as Bill i see around at times?) emailed me back. We went back and forth several times with questions and answers and he answered every time with in 15 minutes. I was very pleased and surprised with the email support.
I'm talking about their own forum...I very rarely get any reply at all, no matter what the subject/problem/issue/question...