LS1TECH - Camaro and Firebird Forum Discussion

PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

comp 54-428-11

Thread Tools
 
Search this Thread
 
Old 09-19-2018 | 05:30 PM
  #1  
Greasymechanic's Avatar
Greasymechanic
Thread Starter
Teching In
 
Joined: Jan 2017
Posts: 46
Likes: 0
From: Mississippi
Default comp 54-428-11
looking to see if anybody has this cam in a 6.0 that I could get a tune from to reference to get my idle corrected any help would be appreciated tia
Reply Like
Old 09-19-2018 | 05:59 PM
  #2  
G Atsma's Avatar
G Atsma
TECH Senior Member
5 Year Member
 
Joined: Jun 2016
Posts: 21,536
Likes: 3,287
From: Central Cal.
Default
What are the specs? Cams with the same specs will tune the same, regardless of mfr.
Reply Like
Old 09-19-2018 | 06:32 PM
  #3  
Greasymechanic's Avatar
Greasymechanic
Thread Starter
Teching In
 
Joined: Jan 2017
Posts: 46
Likes: 0
From: Mississippi
Default
228/230 571/573 112 lsa
Reply Like
Old 09-19-2018 | 06:52 PM
  #4  
brandon6.0's Avatar
brandon6.0
TECH Addict
iTrader: (32)
 
Joined: Dec 2009
Posts: 2,303
Likes: 22
From: Glennville, GA.
Default
Gonna try tht same cam in a customers ls swapped transam next week. Tht one shouldnt be tht hard to tune.
Reply Like
Old 09-19-2018 | 07:08 PM
  #5  
G Atsma's Avatar
G Atsma
TECH Senior Member
5 Year Member
 
Joined: Jun 2016
Posts: 21,536
Likes: 3,287
From: Central Cal.
Default
Looks to be a good midrange cam, but I'm no expert....
Reply Like
Old 09-19-2018 | 07:31 PM
  #6  
Greasymechanic's Avatar
Greasymechanic
Thread Starter
Teching In
 
Joined: Jan 2017
Posts: 46
Likes: 0
From: Mississippi
Default
I’m new to tuning it’s my first car to tune and everything I’ve learned has been from forums so I’m not completely sure what to do sometimes it idles fine in p/n sometimes it surges and hunts for idle and in gear it isles high about 1200 rpms until I drive it for a little while then hunts for idle in gear and will die
Reply Like
Old 09-19-2018 | 08:45 PM
  #7  
truckdoug's Avatar
truckdoug
TECH Senior Member
10 Year Member
iTrader: (26)
 
Joined: Nov 2013
Posts: 6,332
Likes: 527
From: Portlandia
Default
search for "russ k idle config" you should be able to dial idle air pretty closely with that.

make sure its in open loop and the trims are off.
Reply Like

Trending Topics

Old 09-24-2018 | 11:07 AM
  #8  
Main One's Avatar
Main One
Teching In

iTrader: (1)
 
Joined: Jun 2006
Posts: 43
Likes: 0
Default
I'm running that cam in my vette's LS1.

Attached is my latest tune. It's not a 6.0 but may give you some insight.
Attached Files
File Type: hpt
vette maf descreened 16.hpt (246.6 KB, 44 views)
Reply Like
Old 09-29-2018 | 07:55 AM
  #9  
Luke19901's Avatar
Luke19901
Launching!
 
Joined: Jan 2018
Posts: 283
Likes: 0
Default
6.0 L98. 228/232 .580 ish 112 LSA

I use SD for almost every tune that involves boost or camshaft reference so the example is in 2 bar SD. its my personal preference and it works for me. feel free to look over it and take from it what you wish
Attached Files
File Type: hpt
green ute stall.hpt (748.1 KB, 26 views)
Reply Like
Back to Subforum
PCM Diagnostics & Tuning
View Next Unread
Struggles to start when warm




Advanced Search

All times are GMT -5. The time now is 05:28 PM.