PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

100 octane & 12.4 to 1 static CR

Thread Tools
 
Search this Thread
 
Old 01-03-2019, 02:26 AM
  #1  
TECH Addict
Thread Starter
iTrader: (88)
 
Burken01's Avatar
 
Join Date: Mar 2005
Location: Anaheim, Ca
Posts: 2,923
Likes: 0
Received 13 Likes on 12 Posts

Default 100 octane & 12.4 to 1 static CR

Ok tuners

Without getting too much into my setup which is changing by the minute lol

I was originally going to run 91 pump gas and 11.4 to 1 CR

But was wondering about bumping compression to 12.4 to 1 static and running Sunoco100 octane that I have local to me and readily available. I know the cost of 100 vs pump gas.

But gas money aside, am I looking at a solid 15-20 hp/tq by upping CR if we choose 12.4 over 11.4

And is 100 octane enough,Assuming the cam was specd for 11.4 to CR but now want to bump it up?

I'm not quite ready to go E85 and am looking at bridging the gap between 91 pump to E85 since
Old 01-03-2019, 05:38 AM
  #2  
Staging Lane
iTrader: (1)
 
TurboTim's Avatar
 
Join Date: Dec 2012
Posts: 94
Likes: 0
Received 1 Like on 1 Post

Default

That will be enough actane imho.
Old 01-03-2019, 07:46 PM
  #3  
Super Hulk Smash
iTrader: (7)
 
JakeFusion's Avatar
 
Join Date: Aug 2004
Location: Pace, FL
Posts: 11,255
Received 137 Likes on 114 Posts

Default

Should be fine. 100 octane goes a lot further than 91.




All times are GMT -5. The time now is 05:40 AM.