New MAF Table Spreadsheet and RAF Table
#42
TECH Fanatic
Join Date: Mar 2003
Location: La Porte, TX
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Checkmate
Testing shows my new maf table is almost identical to the one BLACK02ss's excel sheet created for me.
So the excel sheets WILL get you very close then if you are a perfectionist like me, you can tweak till you are happy. ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
I agree the MAF table does work great.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#46
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the concept should be the same, i did it in pure excel, he did it in VB, so his is faster, but mine works without macros, and i've seen it run even on old excel 97
it would be nice to run the same set of numbers though and compare the results, just to verify the math though...any volunteers?
it would be nice to run the same set of numbers though and compare the results, just to verify the math though...any volunteers?
#49
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by RedHardSupra
you mean for 'before and after' or logs to do the testing with? actually i got both, i just tuned my friend's 01SS for headers last night...
#51
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
actually, you can combine VE and MAF tuning into one step, as long as you're in SD. the reason for it is that in SD you are gathering MAF data (for MAF calibration), but ignoring them for VE calculations.
so:
step 0:
SD mode
step 1:
do a full table VE tune, like you were trying to stay MAFless (gather good data for MAF ironically enough)
step 2:
put in your new VE and MAF tables, might as well throw in PE in there too, as that's just pure math.
step 3:
drive around some more in SD, to validate your VE, and gather up some more MAF data (as you can compound data from different runs in version 2.5 of my spreadsheet)
step 4:
put in your final MAF and VE changes (usually very minor, consider it 'smoothing')
step 5:
back to MAF mode, and go scan again, everything should run as well as it did in SD (as that's what MAF calibration does, makes calculations agree with sensors).
v'oile!
note: combining VE and MAF calibrations really cuts down the time, twice this week i already did a full tune for two different cars, and they both run perfect now (well, i never touched timing, but that's a whole different ball of wax). took about an hour each
man, if i could only get paid for this stuff... ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Another_User:
either PM me your email account, or just talk to me on aim/yahooIM/icq, they're all in my profile.
so:
step 0:
SD mode
step 1:
do a full table VE tune, like you were trying to stay MAFless (gather good data for MAF ironically enough)
step 2:
put in your new VE and MAF tables, might as well throw in PE in there too, as that's just pure math.
step 3:
drive around some more in SD, to validate your VE, and gather up some more MAF data (as you can compound data from different runs in version 2.5 of my spreadsheet)
step 4:
put in your final MAF and VE changes (usually very minor, consider it 'smoothing')
step 5:
back to MAF mode, and go scan again, everything should run as well as it did in SD (as that's what MAF calibration does, makes calculations agree with sensors).
v'oile!
note: combining VE and MAF calibrations really cuts down the time, twice this week i already did a full tune for two different cars, and they both run perfect now (well, i never touched timing, but that's a whole different ball of wax). took about an hour each
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Another_User:
either PM me your email account, or just talk to me on aim/yahooIM/icq, they're all in my profile.
#52
Launching!
Join Date: Mar 2004
Location: Dallas Texas
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey Guys I was able to use the doc to calculate the P/N RAF but I went back and grabed a scan from cold to operating temp while in gear and when I got to run it the sheet just locks into a never ending calculation loop and I have to end task on it.
I've downloaded new sheet several times and made new scan logs and it keeps doing the same thing. Can you tell me what I'm doing wrong now verses the first time when it worked? Thanks guys!
I've downloaded new sheet several times and made new scan logs and it keeps doing the same thing. Can you tell me what I'm doing wrong now verses the first time when it worked? Thanks guys!
#55
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
you know, you can always use the original MAF calibration spreadsheet that doesn't go into infinite loops simply because it has no loops
www.allmod.net/hpt
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#56
TECH Fanatic
iTrader: (1)
Join Date: Dec 2003
Location: Farmington Hills, MI
Posts: 1,098
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I used RedHardSupra's V25 spreadsheet the other day and the table that it came up with was pretty close to the Monaro. I'm going to do some hand work with it to extrapolate the numbers that it gave me to complete the high and low ends where I had no data. I'll post my results when I get something decent.
My thinking is that if I pick values that emulate the shape of the Monaro table to complete my table, then 3rd order curve fit it, then input the frequency into the equation and solve for airflow, it should give me a very nice smooth curve. Right? (The curve that the spreadsheet output wasn't as smooth as the example curves.)
While I'm here, how do I get data above 9kHz? Just go faster? (Or will that not matter? 9kHz was about 80mph and 80kPa MAP. Maybe I'll have to log some drag strip runs this weekend to get better data...)
My thinking is that if I pick values that emulate the shape of the Monaro table to complete my table, then 3rd order curve fit it, then input the frequency into the equation and solve for airflow, it should give me a very nice smooth curve. Right? (The curve that the spreadsheet output wasn't as smooth as the example curves.)
While I'm here, how do I get data above 9kHz? Just go faster? (Or will that not matter? 9kHz was about 80mph and 80kPa MAP. Maybe I'll have to log some drag strip runs this weekend to get better data...)
#57
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
1. get more data, if the calibration is 'choppy' that means you simply haven't logged enough. use the 'historical compounding' function, in few days you can build a really awesome table.
2. what i do is use my new calibration points (assuming i got a good calibration from LOTS of samples) I graph these new points on XY graph, put a trendline through it (polynomial, 3rd order) and tell it to give me the equation for the best fit line. the equation is usually _very_ long, so you might wanna crank up the 'decimal resolution' on the displayed equation (to the full 30digits preferably, you'll see why) and use it to create the values for points that you haven't it yet. I consider this to be a more academic point, as if we haven't hit it in testing, we probably won't hit it in real life, but just in case, i'd rather have my calibration full and without any jerkiness to it. give it a spin.
best yet, talk to me on AIM, i'll show you more tricks. btw, i love that vette of yours!
2. what i do is use my new calibration points (assuming i got a good calibration from LOTS of samples) I graph these new points on XY graph, put a trendline through it (polynomial, 3rd order) and tell it to give me the equation for the best fit line. the equation is usually _very_ long, so you might wanna crank up the 'decimal resolution' on the displayed equation (to the full 30digits preferably, you'll see why) and use it to create the values for points that you haven't it yet. I consider this to be a more academic point, as if we haven't hit it in testing, we probably won't hit it in real life, but just in case, i'd rather have my calibration full and without any jerkiness to it. give it a spin.
best yet, talk to me on AIM, i'll show you more tricks. btw, i love that vette of yours!
#58
TECH Fanatic
iTrader: (1)
Join Date: Dec 2003
Location: Farmington Hills, MI
Posts: 1,098
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
RHS:
1. Ok, I'll log more and get more samples. My first attempt was just using about 25 minutes of mixed driving. I was pleasantly suprised to see that the data trended very closely to the Monaro table (which I was using before I started SD tuning).
2. That's what I was planning to do. I guess I didn't explain it well. I'm Scooter70 on AIM. I'll add you to my buddylist and talk to you when I have more data to sort thru. We're going to the drag strip on Saturday so I should have more data between now and then. (And I'll get a chance to see what this car will do...) Thanks for the kind words. It was a very interesting learning experience. My next project should be even better.![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
-Matt
1. Ok, I'll log more and get more samples. My first attempt was just using about 25 minutes of mixed driving. I was pleasantly suprised to see that the data trended very closely to the Monaro table (which I was using before I started SD tuning).
2. That's what I was planning to do. I guess I didn't explain it well. I'm Scooter70 on AIM. I'll add you to my buddylist and talk to you when I have more data to sort thru. We're going to the drag strip on Saturday so I should have more data between now and then. (And I'll get a chance to see what this car will do...) Thanks for the kind words. It was a very interesting learning experience. My next project should be even better.
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
-Matt
#59
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's an interesting trick ( to me, anyway ) to get the VE info for your engine. Allot of times, we just think of the AFR as a quality of combustion. But it is also the physical ratio of air flow vs fuel flow.
i.e. if the AFR is 14.7 and the fuel flow is 100 lbs/hr, then the mas airflow is 1470lbs/hr.
100lbs/hr x 14.7 = 1470lbs/hr
Once you have airflow in lbs/hr, you can compute standard CFM.
1 standard cubic foot of air weighs .0745lbs.
so, 1470lbs/hr / 0.745 = 19730cf/h , 1973cf/hr / 60 = 329CFM
With that, RPM and your engine displacement, you can get V.E. directly.
To do this, you need a wideband that can keep up with fast airflow changes (LM-1 or LC-1), and to log RPM and injector duty cycle.
If you can log your MAF sensor output, you can map its output and get CFM/V or CFM/Hz.
If you have a rising rate fuel pressure regulator, you will need to log fuel pressure also. Good idea to log TPS too; since your really only want WOT data.
Fuel flow can be calculated from the standard formula.
I put the fomulas here: Still working on the formatting.
http://67.43.173.134/StupidWidebandTricks.htm
If it seems like allot of math, we are automating it and putting this all into Logworks 2.0
i.e. if the AFR is 14.7 and the fuel flow is 100 lbs/hr, then the mas airflow is 1470lbs/hr.
100lbs/hr x 14.7 = 1470lbs/hr
Once you have airflow in lbs/hr, you can compute standard CFM.
1 standard cubic foot of air weighs .0745lbs.
so, 1470lbs/hr / 0.745 = 19730cf/h , 1973cf/hr / 60 = 329CFM
With that, RPM and your engine displacement, you can get V.E. directly.
To do this, you need a wideband that can keep up with fast airflow changes (LM-1 or LC-1), and to log RPM and injector duty cycle.
If you can log your MAF sensor output, you can map its output and get CFM/V or CFM/Hz.
If you have a rising rate fuel pressure regulator, you will need to log fuel pressure also. Good idea to log TPS too; since your really only want WOT data.
Fuel flow can be calculated from the standard formula.
I put the fomulas here: Still working on the formatting.
http://67.43.173.134/StupidWidebandTricks.htm
If it seems like allot of math, we are automating it and putting this all into Logworks 2.0
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)