PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:
View Poll Results: Favorite Tuner
DiabloSport Predator
168
54.37%
SuperChips
18
5.83%
Hypertech Power Programmer
45
14.56%
Crane/Vinci Tuner
78
25.24%
Voters: 309. You may not vote on this poll

Your Favorite Handheld Tuner

Thread Tools
 
Search this Thread
 
Old 05-08-2007, 09:12 PM
  #101  
TECH Addict
iTrader: (11)
 
KurtRardin's Avatar
 
Join Date: Nov 2005
Location: Montgomery, AL
Posts: 2,148
Likes: 0
Received 3 Likes on 3 Posts

Default

BTW, I just yanked the AIR system off of my car and left all of the plugs hanging unplugged...and put a Hotcam in($120 first cam... I see why everyone says to go bigger) and NO CHECK ENGINE LIGHTS!!!! As a matter of fact, I havent had a single check engine light since I've owned this tuner. !EGR, !AIR, !CATS, !Rear02s, LT headers, LS6 Intake, Cam.... and a bunch of dangling plug-ins for old equipment. NO SES lights. Go Vinci...especially if you're a 98
Old 05-10-2007, 08:42 PM
  #102  
11 Second Club
iTrader: (20)
 
5_02ls1's Avatar
 
Join Date: Oct 2006
Location: Virginia
Posts: 3,131
Likes: 0
Received 0 Likes on 0 Posts

Default

god this is old.lets just say the hpp3 didnt agree with any mods ,but it tells you that in the book that comes with it.wish the vinci was offered then when i got it.
i dont care what any of you guys say when my 98 was stock the hypertech did increase bottom end power.stock it wouldnt spin a tire without powerbraking with rthe hpp3 tune it would spin through most of 2nd gear.i read some guy put it on a 96 z in the thread that had headers and some other stuff,im sure he didnt gain anything its designed to work on a stock setup.i just wished i wouldve got somthin that done more thers nowhere in ,my area that tunes so i have to send off my computer everytime i add somthing else.
Old 10-01-2007, 02:34 AM
  #103  
TECH Senior Member
iTrader: (39)
 
LilJayV10's Avatar
 
Join Date: Apr 2007
Location: Evansville,IN
Posts: 9,447
Received 898 Likes on 640 Posts

Default

So are just bolt on cars good for a hand held or mail order? I know zero about this and there's no way I would ever try and tune my own car. I am scared to take my car to someone who says they know what they are doing but end up burning a hole in a piston.

I have a 00' Firehawk and planning on Lt's, LS6 intake, reverse split cam, 230 range, ported TB, FTRA. Hoping for 390-400 RWHP w/ lots of tourqe.

Is that to much for a hand held or should i trailer it to a shop? I live in southern indiana and I don't know of any shops around that tune. Thanks. I will be keeping an eye on this thread.

Jason
Old 10-04-2007, 05:27 PM
  #104  
10 Second Club
iTrader: (3)
 
mrr23's Avatar
 
Join Date: Mar 2004
Location: orlando, fl
Posts: 4,266
Likes: 0
Received 0 Likes on 0 Posts

Default

the vinci and the predator will be your best option for a handheld.
Old 10-04-2007, 05:58 PM
  #105  
TECH Resident
iTrader: (8)
 
stoverz28's Avatar
 
Join Date: Aug 2006
Location: Buda, Texas
Posts: 792
Likes: 0
Received 6 Likes on 6 Posts

Default

No favorite here, but i do know that the hpp3 is pure crap. I had an 00 z28 a4 and when it was cold air and exhaust i put a hypertech on it, long story short i couldnt even power brake it after the hpp3 all the bottom end power was gone, it would just stall up and do nothing, mailorder tune would be best for the price.
Old 10-04-2007, 06:04 PM
  #106  
12 Second Club
iTrader: (1)
 
boola1341's Avatar
 
Join Date: May 2007
Location: Meherrin Va.
Posts: 558
Likes: 0
Received 0 Likes on 0 Posts
Default

so the crane and predator can delete the torque management
Old 10-06-2007, 01:44 AM
  #107  
On The Tree
iTrader: (5)
 
LS7jUnKiE's Avatar
 
Join Date: Sep 2007
Location: Tampa, Florida
Posts: 164
Likes: 0
Received 0 Likes on 0 Posts
Default

...the dyno!!!! haha but if i had to pick then diablosport.
Old 10-06-2007, 02:12 AM
  #108  
Restricted User
iTrader: (10)
 
Zero4488's Avatar
 
Join Date: Feb 2007
Location: Jersey
Posts: 1,455
Likes: 0
Received 0 Likes on 0 Posts

Default

Diablo ***!!
Old 04-29-2008, 11:54 AM
  #109  
LS1Tech Sponsor
iTrader: (2)
 
Mike@Diablosport's Avatar
 
Join Date: Jan 2008
Location: Central Florida
Posts: 2,292
Received 8 Likes on 7 Posts

Default

Liking this thread.....
Old 04-30-2008, 11:46 PM
  #110  
Staging Lane
 
terryr's Avatar
 
Join Date: Jun 2005
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts

Default

There's a comparison of handheld tuners in a 12 page story at;

http://www.gmhightechperformance.com..._in/index.html
Old 02-26-2009, 09:38 PM
  #111  
TECH Senior Member
iTrader: (1)
 
NHRAMAN's Avatar
 
Join Date: Apr 2005
Location: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Posts: 8,810
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Originally Posted by mrr23
i use the vinci/crane handheld on both of my cars.
Thanx to you I bought one also----it's pretty good..also has setting for different cams, and a Supercharger setting also.
Old 03-29-2009, 09:46 AM
  #112  
Teching In
 
VeroWing's Avatar
 
Join Date: Mar 2009
Location: Vero Beach, Fl.
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

My car is a street car, '02 C5 6spd. I've added Kooks LT headers/hi-flow catted X-pipe, and Vararam cai. It ran strong, but adding the Diablo Predator tune woke up this car like nothing else. It turned it into an animal.
I adjusted fuel trims, fan settings, etc., as per advise from their website. Although I'm an "old school" do it yourself streetrod guy, I found this handheld tuner to be very user friendly.
I'm not familiar with the other handhelds, but I could not be any happier with my decision to go with the Diablo Predator. Mike
Old 03-29-2009, 10:00 AM
  #113  
LS1Tech Sponsor
 
06MonteSS's Avatar
 
Join Date: Dec 2005
Location: CT
Posts: 2,928
Likes: 0
Received 11 Likes on 11 Posts

Default

excellent!!

glad my info could help ya out!

__________________
06MonteSS / DiabLew Tune

2014 Camaro 2SS/RS - LS3, 6-speed manual, short-throw performance shifter, NPP dual-mode performance exhaust, 1LE front splitter, ZL1 rockers, Z28 Rear Spoiler, all paint-matched Red Rock Metallic, BMR strut tower brace, Cold Air Inductions cold air intake, Apex Motorsports, Inc. catch-can, Custom DiabLew Tune
www.diablewtune.com -- www.diablocustomtune.com -- www.diablocustomtunegm.com
Old 03-29-2009, 05:56 PM
  #114  
TECH Resident
 
01Z28M6's Avatar
 
Join Date: Oct 2005
Location: Taxme, Ohio
Posts: 781
Likes: 0
Received 0 Likes on 0 Posts

Default when a handheld tuner can't help

Originally Posted by 06MonteSS
excellent!!

glad my info could help ya out!

You've helped a lot of people out Lew. I just wish I could use my diablosport with my GM LS6 H/C. I'd love to tune the car myself with the handheld but the unit is limited to the LS1 tuning parameters because of the VIN designation within the PCM.
Old 04-13-2009, 10:06 AM
  #115  
LS1Tech Sponsor
iTrader: (2)
 
Mike@Diablosport's Avatar
 
Join Date: Jan 2008
Location: Central Florida
Posts: 2,292
Received 8 Likes on 7 Posts

Default

Originally Posted by 01Z28M6
You've helped a lot of people out Lew. I just wish I could use my diablosport with my GM LS6 H/C. I'd love to tune the car myself with the handheld but the unit is limited to the LS1 tuning parameters because of the VIN designation within the PCM.
CMR, CMR, CMR.
Old 04-13-2009, 10:41 AM
  #116  
TECH Enthusiast
 
Nightrydass's Avatar
 
Join Date: Aug 2006
Location: In your sisters panties
Posts: 623
Likes: 0
Received 0 Likes on 0 Posts
Default

what's the deal with SLP's Diablo Tuner; what makes that one so "special"?
Old 04-13-2009, 10:55 AM
  #117  
TECH Resident
 
01Z28M6's Avatar
 
Join Date: Oct 2005
Location: Taxme, Ohio
Posts: 781
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Mike@Diablosport
CMR, CMR, CMR.

The reason I bought the Predator was to tune the car myself and that would have worked if I had not installed the GM LS6 heads and cam.

I have contacted the closest CMR compliant speed shops. The quotes were $400 - $500 and the nearest is a two hour drive away. I upgraded my efilive scan only to the commercial license. I think that is the way for me to go now. If all goes well I will have my barely touched Predator up for sale unless there remains a good reason for keeping it? Thanks.
Old 04-13-2009, 12:08 PM
  #118  
LS1Tech Sponsor
iTrader: (2)
 
Mike@Diablosport's Avatar
 
Join Date: Jan 2008
Location: Central Florida
Posts: 2,292
Received 8 Likes on 7 Posts

Default

Originally Posted by 01Z28M6
The reason I bought the Predator was to tune the car myself and that would have worked if I had not installed the GM LS6 heads and cam.

I have contacted the closest CMR compliant speed shops. The quotes were $400 - $500 and the nearest is a two hour drive away. I upgraded my efilive scan only to the commercial license. I think that is the way for me to go now. If all goes well I will have my barely touched Predator up for sale unless there remains a good reason for keeping it? Thanks.
If you restore the stock tune to the PCM with the predator then tune it with EFIlive, you can carry the predator around to modify the tune if needed without a laptop....plus it will still log and do diagnostics...
Old 04-26-2009, 01:23 AM
  #119  
TECH Resident
 
01Z28M6's Avatar
 
Join Date: Oct 2005
Location: Taxme, Ohio
Posts: 781
Likes: 0
Received 0 Likes on 0 Posts

Default

Thanks for the answer Mike - a reason to hold on to the predator after tuning that is.
Old 06-24-2009, 08:52 AM
  #120  
TECH Resident
iTrader: (18)
 
5301113's Avatar
 
Join Date: Apr 2007
Location: Odessa TX
Posts: 953
Likes: 0
Received 0 Likes on 0 Posts
Default

Predator wins hands down. The customer support is great. Newer revisions allow you to datalog to the Predator, or to use the Predator as a pass thru logging device and live stream data to our Dataviewer software. It has ability for to hold up to 5 custom tunes in addition to the canned tunes. The Predator internet updateable, so you can download future updates to the tool at home on your PC rather than having to send it in for updates. I can go on on and on. Thanks Diablosport


Quick Reply: Your Favorite Handheld Tuner



All times are GMT -5. The time now is 09:53 AM.