Scanner PIDs not working
Scanner PIDs not working HP Tuners v1.7
Why is it that when I put in option PIDs like Trans Temp, Trans Torque output, etc, nothing will work. Go out and start recording but none of the new PID will display anything on the chart.
Also I downloaded a whole list of Config files, so that I can use them when logging for different stuff. I open up the scanner and choose to open config file, when I look at my chart, they are completly blank like it won't load them.
Why is it that when I put in option PIDs like Trans Temp, Trans Torque output, etc, nothing will work. Go out and start recording but none of the new PID will display anything on the chart.
Also I downloaded a whole list of Config files, so that I can use them when logging for different stuff. I open up the scanner and choose to open config file, when I look at my chart, they are completly blank like it won't load them.
Originally Posted by Zick
HP Tuners v1.7
Why is it that when I put in option PIDs like Trans Temp, Trans Torque output, etc, nothing will work. Go out and start recording but none of the new PID will display anything on the chart.
Also I downloaded a whole list of Config files, so that I can use them when logging for different stuff. I open up the scanner and choose to open config file, when I look at my chart, they are completly blank like it won't load them.
Why is it that when I put in option PIDs like Trans Temp, Trans Torque output, etc, nothing will work. Go out and start recording but none of the new PID will display anything on the chart.
Also I downloaded a whole list of Config files, so that I can use them when logging for different stuff. I open up the scanner and choose to open config file, when I look at my chart, they are completly blank like it won't load them.
Originally Posted by bowtieman81
You have to set up the charts too. Just double click,or right click (dont remember) on the chart rows and you can pick what PID goes in there.
Yup I tried that too. The PIDs I select will show up in the chart but they act like their dead when I'm scanning.
Originally Posted by foff667
when the chart is blank just right click and hit default and the default settings will come up...i believe thats all in da da daa http://www.hptuners.com/pub/VCM%20Suite.chm the help file
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
are you adding the pids to the table display? They MUST be in the table display ... what PIDS in particular? if you want send me your config file and the pids you want added and I'll take a look. Email is in my sig , my first name @ my last name.com
This is what I mean. I added in Delivered engine tq, desired engine tq, and transmission temp. They show up on the chart but when I start recording, I don't get any kind of reading from them.
Trending Topics
Originally Posted by P Mack
Read horist's post again. Did you add them to the table display? That picture is not the table display.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Ok, I think I figured it out where to add them. But when I try to add a new PID I get this error. Unable to add PID, 24 data bytes exceeded.
I tried deleting some other PID on there but still got the error.
I tried deleting some other PID on there but still got the error.
Thanks guys. I just had to delete more PIDs so I could add the ones I needed. I got them added to the table so hopefully now they'll work when I add them to the chart and go scanning.
Thanks again for helping this poor boy out.
Thanks again for helping this poor boy out.
