problems with right 02sensor
What is the code. There are many O2 sensor codes for our cars, so it could be any of them.
Also via PCM scanner are the fuel trim values of B1 and B2 about the same and same for injector pulse width values ?
Have you reset PCM by leaving power off for some period to see if that would clear the problem up ?
Is B2S1 always reporting the biased 0.450 mVolts or is it switching across 0 volts ?
Use PCM scanner I/M smog tests and see who is getting into a complete state or not.
Not sure where you got the AFR value from but if it was a scanner it most likely was the PCM Commanded AFR value, not the true AFR.
Non smog gas stoch is 14.7:1,
smog gas is 14.2:1 since it contains O2 that will get burned and seen in exhaust.
BTW, I went to Glenbard East H.S in mid 1960s.
I started with Dick Portillo when he frst opened a stand off of North Ave in Glendale hgts, if I had stuck it out I'd be as rich as he got :-)
I do miss that Chi-Town food for sure ..
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by tuff:
<strong> I just got my car running after sitting all winter just finished up my strange 12 bolt. anyways i a taped my car today and it said bank 2 sencor 1 fault so when i got to work i ordered a sensor and put it in and on the way home same thing. i looked at the harness and everything is fine.and my ltft are way outthere need some help thanks. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">
Trending Topics
The Best V8 Stories One Small Block at Time


