Wiring harness
Yes it will work. You have to move some a pin or two if you want the skip shift to work. But most bypass it anyways. He'll have to tune the code for it out of the pcm if you do not want to go through the trouble of repinning it. But while it's out it's a piece of cake to pull the loom and tape off and pull the auto wiring out up to the pcm. It would not take more than a couple of hours.
What about all the plugs for the 6 speed, the auto harness doesnt have them does it? I know the auto has the big round connector vs the 6 speed having the 3 or 4 smaller connectors.
What about all the plugs for the 6 speed, the auto harness doesnt have them does it? I know the auto has the big round connector vs the 6 speed having the 3 or 4 smaller connectors.
That's why you repin it if you want to keep the functions the pcm does like reverse inhibit, skip shift. But you do not need that crap to make it function. Plug in the vss ziptie back the auto connector reflash the pcm and save yourself the work and headache of screwing with it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
