What can be the problem cant figure it out PLEASE HELP
#1
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 2000 camaro took the car out and raced it and it ran perfect, three days lateter i took the car out again and did a few burn outs and launches to try to get the car to hook up. On my last launch the car started popping and really running like ****. I put it on the trailor and figured i filed my plugs out. The next day i changed my plugs and still popping and uniing like ****. So i figured i possibilly clogged a injector thought it was un likely but i checked anyways not the problem, i started checking the temp. on each header tube by touch and the 2 front passenger header tubes were cold to the touch. So i thought something may have hapened with the crank sensor so i chenged the crank sensor and checked the harnes for the sensor and it was melted to i changed the harness checked it twice to make sure the wires were exactly how they came off and saudered the wires. And it still will not run/run right all it does is pop when it is trying to turn over.
Please help dont know what it can be, whats my next step? i am going to hook up my friends 2001 computer on the car today to see if i somehow fried the computer
thanks in advance
Rich
Please help dont know what it can be, whats my next step? i am going to hook up my friends 2001 computer on the car today to see if i somehow fried the computer
thanks in advance
Rich
#3
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
forgot to mention i started it today and the exhaust tubes that werent getting hot are now and 3 on the drivers side arent fireing now, i took the plug wire off of the 2 cold cylinders when i noticed they were cold and put a old plug in it and they sparking so i knew i wias getting fire
#6
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the 3 wire harness going to the crank pos. sensor was melted i couldnt tell if there was any metal contact but i replaced the 3 wire harnessgoing to the crank sensor and sautered the ends
#7
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i changed the computer and it still didnt work if i hold the key to crank the car it will just crank and crank and after turning the key for a minute it will turn over but pop real bad and smoke and when i am trying to turn it over it makes a weird noice back fires and a womp kinda of noise kind i stopped trying when my starter stop working
if i didnt have bad luck i wouldnt have any
any ideas?
if i didnt have bad luck i wouldnt have any
any ideas?
Trending Topics
#9
10 Second Club
iTrader: (3)
Join Date: Nov 2002
Location: Lubbock,TX
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
After changing out the crank sensor and wires, you might need to do a crank position relearn. You will need to take it to a tuner or the dealer for that.
In the past, when I have had snapping and popping or running problems (when the car is cold) it was the O2 sensors (when the car was warmed up) it was the maf sensor fuse.
Good luck in your quest. You might give Vengeance Racing a call and talk to Mike. Or, shoot Ron or Mike an Email. Tell them Todd (Blue Thunder) told ya to call.
In the past, when I have had snapping and popping or running problems (when the car is cold) it was the O2 sensors (when the car was warmed up) it was the maf sensor fuse.
Good luck in your quest. You might give Vengeance Racing a call and talk to Mike. Or, shoot Ron or Mike an Email. Tell them Todd (Blue Thunder) told ya to call.
#10
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
After changing out the crank sensor and wires, you might need to do a crank position relearn. You will need to take it to a tuner or the dealer for that.
In the past, when I have had snapping and popping or running problems (when the car is cold) it was the O2 sensors (when the car was warmed up) it was the maf sensor fuse.
Good luck in your quest. You might give Vengeance Racing a call and talk to Mike. Or, shoot Ron or Mike an Email. Tell them Todd (Blue Thunder) told ya to call.
In the past, when I have had snapping and popping or running problems (when the car is cold) it was the O2 sensors (when the car was warmed up) it was the maf sensor fuse.
Good luck in your quest. You might give Vengeance Racing a call and talk to Mike. Or, shoot Ron or Mike an Email. Tell them Todd (Blue Thunder) told ya to call.
#12
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
it popping out the exhause but while i am cranking it over it makes this weird noise that i have never heard before kinda hard to explain womp is th only to explain it
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've had a similar problem when my injector driver wasn't plugged in all the way. Some cylinders would get no fuel and the o2 was telling the computer it was lean, the computer would dump fuel to the cylinders that were working. Took a while to find a dumb problem.
#14
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
but tis was just all of a sudden put the car down the track 6 times raced it ran perfect, then went to test it did 3 burn outs 3 launches and on last launch it went to crap change my plugs still no go checked crank sensor and harness and harness was slightly melted changed that and sensor still crap, visually inspected springs and push rods and nothing were do i go from here??
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Any codes on the OBDII port? Oil in coolant (Blown Head Gasket)? Water in oil (BHG)? Bent pushrod? Removed valve covers and looked at valve action while turning engine over with starter? "womp" sound could be compressed air from bad cylinder rushing out of bad valve seat/bent valve/burned exhaust valve/burned piston crown (hole in piston) ... good luck ...
#17
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Any codes on the OBDII port? Oil in coolant (Blown Head Gasket)? Water in oil (BHG)? Bent pushrod? Removed valve covers and looked at valve action while turning engine over with starter? "womp" sound could be compressed air from bad cylinder rushing out of bad valve seat/bent valve/burned exhaust valve/burned piston crown (hole in piston) ... good luck ...
#18
Registered User
Thread Starter
iTrader: (125)
Join Date: Oct 2003
Location: New Orleans
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.youtube.com/watch?v=JvOPr2UFd28
here is a vid of it trying to start and the sound listen closley can hear exactly what i am talking about at the end
here is a vid of it trying to start and the sound listen closley can hear exactly what i am talking about at the end