john lolos

finally finished painting the bay after welding all the extraneous factory holes shut

TechCam97

iTrader: (5)

Looks great!

Jaxem

iTrader: (3)

Cleaned her up for a buyer to come look tomorrow

Hopefully she sells and i'll be driving back an M6 on Sunday

xGnarciax

Finally got around to putting the 418 on the k member

Sam Hadji

iTrader: (1)

Fuel pump went out on me, or so I think, so I ordered a fuel pump and some sensors, going to do a full tune up on New Years!

Nate_C

Replaced the bird on the rear filler panel. It's red again!

blackbyrd

iTrader: (14)

Just finished sound deadening the car still need to put the seats back in

Daniel Richards

iTrader: (1)

ordered a set of lmc lights to replace the bls v2 kit (complete low beam and high beam) I will be putting up for sale when I get the lmc lights in. just one more part on the list of things I'm selling off the car before I sell the car itself.

Tranz Zam

Picked up some chrome C5 Z06's for it.

Now I have to wait until spring to mount them.

sleepinghawk

This is something I really want to do to see if it would knock out some of the underside sound, along with maybe the heat when driving long trips on my gas pedal foot.

Daniel Richards

iTrader: (1)

Sold my Superhawk hood to https://ls1tech.com/forums/member.php?u=260041 changed the oil and PCV and swapped out the BLS high beams to the LMC high beams, next on the list is to swap out the low beams later tonight so I can post the BLS kit for sale.

SEABASSS03

Installed front and rear drilled/slotted disc rotors, Front doulble drilled/rear single drilled... painted calipers, bleed the brake line, Plastic dipped the wheels, OHH and added some fender stripes

blackbyrd

iTrader: (14)

I'll send you some feedback when I get the car out and drive it as i still havnt since i did the work. fouled out the plugs when i first tried to start her and i got some new ones but havnt quite found the motivation to do the work just yet since she isnt my daily driver.....

I expect a bit of a difference since i have longtubes ORY, and B&B exhaust under the car and no back seat. I put down 3 layers of 50 MIL in the back seat and truck deck area so it should affect the exhaust note and road noise some

On a side note i did manage to finish wiring up my ws6 seats

sleepinghawk

Ill be waiting! Thanks

CO_BlackHawk

Changed the oil. Wasnt sure what was in there, it was new but had no idea what it was, so went with the Castrol Edge with TI 5w30 and a Mobil 1 filter.

Daniel Richards

iTrader: (1)

bought the car that will be replacing the bird yesterday. Needs a few thing before it takes daily driver status from the bird and frees up the bird to be for sale.

WS6 #3392

Put the WS6 on the scales. Came in at 3540lbs with a full tank of gas.

Jaxem

iTrader: (3)

Finally got warm enough that i could wash her for the first time!

F-off

I played with the carb & migged in a new battery tray. Would you like to see a video?

Frisco415

I am trying to put night riders lights on my 02 WS6. Does anyone have a video on how to remove the damn grill from the nostrils from the inside of the hood, this looks to difficult for me, just need a video to help me, also how to attach the lights

Thanks