chevymec

iTrader: (19)

Moved it from under the carport.

t-trimz28

iTrader: (3)

Here you go...







Still needs to be wet sanded and buffed but I wanted to get it back on the road for a few days first. I couldnt stand her being gone for another week.

ToMMy_DuKeS

My birds drivers side power window switch decided to break! yay!

6speedt/a

iTrader: (1)

I looked at it in the garage and thought to myself how much fun it would be to go for a drive. Then I looked down at that cast Damn cast from surgery was on my right arm and the car is an m6. Then I cried a little on the inside.....Its been almost a month with no T/A I am starting to go thru withdrawals.

blackandgold

iTrader: (2)

this weekend, new brakemotive rotors, k&n air filter, and I polished and installed my extra rear filler panel.

ToMMy_DuKeS

we drove around and looked for a new t/a front bumper...no luck though

Swiat34

iTrader: (9)

Started relocating the fuse blocks in the Trans Am. Removed almost 15' of wire loom and about a mile of electrical tape. Labeled all the wires and got all the damned hot glue off from the case that the wires go into to pass thru the firewall. My fingers hurt! Been working for 12 hours mostly alone. Depending when I get home and how I feel, I might start cutting wires in the afternoon. SMH What a mess that **** is!

myk

iTrader: (4)

Did an oil change and tried the Penzoil Ultra, as it was only $2 more than the Platinum. Isn't it weird how cars seem to run better after you wash or otherwise service them? Also, made a friend who drives a new Fusion Sport feel like crap by reminding him about gas mileage and performance numbers that came up on a trip to Irvine...

AwsmGy

iTrader: (4)

Got some new center caps. So long corvette logos!

TORCHD 02 TA

iTrader: (39)

Where did you get those from?

SilverV6Camaro

Over the weekend did spark plugs, wires, fuel filter, radiator and heater hoses, thermostat, belts, and coolant flush. Long day!

AwsmGy

iTrader: (4)

I got the caps themselves off ebay and then had Brent Franker make me vinyls.

meine96ws6

iTrader: (4)

pressure washed the floor mats...with some SHOUT, and the look good as new!! spot treated the carpets..

wiped all the leather down.. cleaned the corned with a brush
completely detailed the outside and inside!

and after i was done cleaning..i took a few picture and the rain came down...

VinR1

iTrader: (17)

over the past month or so... dumped the Borla, Corsa tips, clear front turn signals, 02 console w/ custom mounted Sirius radio...

oh, and slammed the hell out of it

20TA02

iTrader: (5)

dropped off my new water pump to the shop that has my car... also bought lifters, lifter trays, pushrods, and 160 thermostat...

sweetride98

iTrader: (2)

I got my car back from the exhaust shop had to have catback welded the bands wouldnt hold it tight enough and kept rattling on the bumber. Then I installed the Strut Mount brace and installed my ported polished and powder coated Throttle Body.

blackandgold

iTrader: (2)

Quick wash and stainless steel pontiac letters.

1Bad97WS-6

iTrader: (3)

I ordered it a SS4000 stall and 373 gears...

phoenix57

iTrader: (1)

Just got a ported throttle body from tim here on ls1.tech and he does awsome work after putting it on raced my buds new 5.0 and won

LunarWillow

iTrader: (3)

Wash, vacuum, detail, nitpicked the visual imperfections, and dreamed of the parts I want to order for it, starting with another catback, the Dynomax muffler I have is way too tame for my taste lol