imprtkillr2810

It was almost completely plug and play. I would say for all four lights maybe 1-1 1/2 hours. My kit came from hawks

20TA02

iTrader: (5)

Finished installing my Strange S60.

Decadence75

iTrader: (17)

Spent all day pulling the trans and reinstalling it just so I could swap out the slave quick connect fitting.

http://www.red2kta.com/2014/03/13/harrowing-hydraulics/

Daniel Richards

iTrader: (1)

over the last 2 weekends (bushing issue delayed install of one control arm by a week and shocks where only just ordered this week) I installed BMR springs, SLP Bilstein shocks, Founders on-car adjustable Panhard bar and Founders 3-peice poly lower control arms.

So rear suspension is done, now to get the front suspension rebuilt very soon.

It just goes to show how much my front end has sagged on the stock springs, on flat ground the car sits level, and my front end is BONE stock.

"MAC"

iTrader: (1)

Been ordering parts for her i drove it a bit to stretch her legs and well got pulled over bc some cop thought i had a tailight out lol. I told him it had water in it and he let me go so i need to drill the holes in it and the cop was awesome for letting me go.

BrainFreezE

iTrader: (2)

Bought a ny trex triple threat nitrous kit, oml 10mm wires with tr6 plugs rims, new tires. I can't post any pictures from my app on my phone of the items but will post through computer when I have them installed.

Kevin Lee 487

iTrader: (1)

Got the rattling *** catalytic converter replaced

M4N14C

iTrader: (3)

Used CRC cleaner on MAF and TB. I'm surprised of what a difference it made. Pulls harder and no hesitation at all.

great421

iTrader: (1)

After 228,500 miles, had to replace the IAT sensor.

Almost a quarter million miles and 18 years of use - a pretty good life for a $22 dollar part.

autogeek23

iTrader: (13)

Installed my black hammertone bmr STB! For mostly looks I know. But I like it

BrainFreezE

iTrader: (2)

put these shoes on

"MAC"

iTrader: (1)

Um pure sexy! Goes perfectly with your car.

Decadence75

iTrader: (17)

Finally re-installed the gauge pod

http://www.red2kta.com/2014/03/20/gauges-re-installed/

autogeek23

iTrader: (13)

Brainfreeze, those wheels look ****. Also what hood is that on your car? Nvm, I switched to the full site and could see is a ws6 hood

BrainFreezE

iTrader: (2)

its the suncoast creations ws6 so it sits higher than the oem ws6 . thanks the rims are great, just now it's rubbing in the inside I went with 295 so I gotta probably pound it in a little where it's rubbing. Only rubs when I got bumps tho. And there are a lot of bumpy streets in miami.

20TA02

iTrader: (5)

Broke in the Strange S60... and bought some Bilsteins to install either tomorrow or Sunday.

DrEvyl

iTrader: (5)

I picked these up off craigslist last night for $300.. they need to be refinished, but I can make them look good as new for less than the price of a new wheel.

Paul Bell

iTrader: (9)

As I understand it, the "proper way" is with some nice long smokey burnouts.

AKGrownTA

Woke the car up from it's long winter nap and installed new wheels and tires!



Off with the old!!!



On with the NEW!
Front wheels: Hurst Dazzler w/Lip 17x9
Tires: Nitto 555ZR 275/40

Rear wheels: Hurst Dazzler w/Lip 17x10.5
Tires: Nitto 555ZR 315/35



All fit perfect with no banging required!





Still 16" of snow in the yard and 2" of ice on the street, so back to sleep she goes.



Anyway that's what I did to my TA today!

TAvsGN

Did the LMC headlight conversion. Not going the HID route, so I installed Putco Nitro Blue bulbs. Also replaced the foglight assemblies with new pieces and installed the Nitro Blues in those too. Looks really good IMHO. I have those bulbs in my 02 Lesabre too and really like them. I started on the sequential taillight mod too. I picked up a spare taillight harness so I wouldn't have to cut the existing one. Just have to wire the modules in.

Just to keep everyone happy, I washed, vacuumed and cleaned the windows on the wife's Optima too!!!