Project :Blackbird - 2002 Trans-Am WS6
#1
TECH Apprentice
Thread Starter
Project :Blackbird - 2002 Trans-Am WS6
Hey everyone!
IG : @blackbird_ws.6
7th Fbody here
Ever since my 98 TA, I wanted another Trans Am. Bought my 01 Camaro a few years back and did a 6.0 up with cam etc, was a fun car, but always had a soft spot for the Trans Am.
Found this TA on Kijiji back last June, got talking to the guy and got it down to a more then fair price (Sub 10k). Car needed a LF wheel bearing, Trans Mount.. and thats it.
Hood had air brushed flames, which I wrapped the first day it came home (hood is coming off for paint this weekend actually to fix it properlly).
So far I have done
-Prokit
-OEM Z06 Rims (C5)
-Longtubes,Y,Raven (flowmaster) Muffler
-Poly Trans Mount
-LED Fog lights
Going to do this spring :
-Gunmetal Ramair and "TRANS-AM" Door emblems
- 4.10 gears (pinon seal is leaking, so going to just do gears and all seals, ujoints etc)
- LED low and high beams
Keeping this one a fun bolt on/gear car for now.. loving having a black TA though!
When I bough it :
After Wrap/Rims and Lower :
Pre Storage Detail :
Interior is legit, mint :
Stock Rims on for Storage :
Away for Storage, yanking hood off on Saturday :
Installed my LED fogs this weekend, love them :
IG : @blackbird_ws.6
7th Fbody here
Ever since my 98 TA, I wanted another Trans Am. Bought my 01 Camaro a few years back and did a 6.0 up with cam etc, was a fun car, but always had a soft spot for the Trans Am.
Found this TA on Kijiji back last June, got talking to the guy and got it down to a more then fair price (Sub 10k). Car needed a LF wheel bearing, Trans Mount.. and thats it.
Hood had air brushed flames, which I wrapped the first day it came home (hood is coming off for paint this weekend actually to fix it properlly).
So far I have done
-Prokit
-OEM Z06 Rims (C5)
-Longtubes,Y,Raven (flowmaster) Muffler
-Poly Trans Mount
-LED Fog lights
Going to do this spring :
-Gunmetal Ramair and "TRANS-AM" Door emblems
- 4.10 gears (pinon seal is leaking, so going to just do gears and all seals, ujoints etc)
- LED low and high beams
Keeping this one a fun bolt on/gear car for now.. loving having a black TA though!
When I bough it :
After Wrap/Rims and Lower :
Pre Storage Detail :
Interior is legit, mint :
Stock Rims on for Storage :
Away for Storage, yanking hood off on Saturday :
Installed my LED fogs this weekend, love them :
Last edited by Ape Man; 03-06-2018 at 06:55 AM.
#3
10 Second Club
Nice looking ride! Looks very clean!
#6
TECH Apprentice
Thread Starter
Finished my lighting mods.
All thats left :
-DS window motor (I have part, just gotta install)
-Install 2 new front door speakers
-Brake Service
-Do a full glaze and seal
-Remove from Barn in about a month
-Off to Arun for a Tune
-Fresh oil and filter and New pinon seal install (not going to do 4.10's I'll wait till I have a 10bolt issue, then upgrade lol)
Hawks HID Kit with rebuilt motors, 880 LED fogs, LED DRL/Signals
880 LED fogs, LED DRL/Signals
LED Interior lighting
LED Plate Light
LED Reverse Bulbs
All thats left :
-DS window motor (I have part, just gotta install)
-Install 2 new front door speakers
-Brake Service
-Do a full glaze and seal
-Remove from Barn in about a month
-Off to Arun for a Tune
-Fresh oil and filter and New pinon seal install (not going to do 4.10's I'll wait till I have a 10bolt issue, then upgrade lol)
Hawks HID Kit with rebuilt motors, 880 LED fogs, LED DRL/Signals
880 LED fogs, LED DRL/Signals
LED Interior lighting
LED Plate Light
LED Reverse Bulbs
#7
10 Second Club
Looks good dude!
Trending Topics
#10
TECH Apprentice
Thread Starter