Do all WS6 Trans Ams have the badge under the right tail light?
#1
Teching In
Thread Starter
Join Date: Oct 2005
Location: New Orleans
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hi I'm trying to buy a 02 Trans Am WS6. Some of the one's that i've been looking at have the ram air sticker on the air lid but don't have the badge under the tail light. I would like to know how come some have them and some don't?
I know that the best way to kno that u're buying a Trans am is to look for the RPO code on the door but I would just like to know to be sure. thank you for your info!!
I know that the best way to kno that u're buying a Trans am is to look for the RPO code on the door but I would just like to know to be sure. thank you for your info!!
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The ONLY way to know for sure is to check the RPO....but as far as I know all WS6's will have the badge. I think you might see some without them for 2 reasons...1. its not a real WS6...2. the badge was stolen.
My badge got stolen...im guessing at the movie theatre, I did not notice until the next day
so now the car dont leave my sight...some people dont realize how close they come to death sometimes.
Also when I went with my cousin looking for a T/A for him, we seen 2 real WS6's without the badge...I mentioned it to the salesman its missing and like 75$....I got that dumb stare like "what".....so you will see them out there without it.
You can tell by the rims, hood and emblems walking up and WS6's sit about a inch lower than a T/A. RPO is the sure way. Good luck hunting
My badge got stolen...im guessing at the movie theatre, I did not notice until the next day
![Cry](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cry.gif)
Also when I went with my cousin looking for a T/A for him, we seen 2 real WS6's without the badge...I mentioned it to the salesman its missing and like 75$....I got that dumb stare like "what".....so you will see them out there without it.
You can tell by the rims, hood and emblems walking up and WS6's sit about a inch lower than a T/A. RPO is the sure way. Good luck hunting
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea, I can't remember the placement of it but one of them should say WS6 and all WS6's came with the badges originally unless they were stolen or maybe taken off for paint or something of that nature.
#5
TECH Regular
Join Date: Oct 2002
Location: Edgewood, MD
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
An accident of some sort where the bumper had to be replaced could be another reason for the badge not being there. My WS6 was rear-ended, the bumper had to be replaced. The body shop replaced the badge since it was insurance work, but if it was something I was paying for outta pocket, that badge would have stayed off. The dealerships around here charge $125 for it, and half the batch was broken when the body was trying to get a new one.
My WS6 does not sit any lower than a standard TA. It's exactly the same height. Some Firehawk's will sit lower, depending on the suspension. But I believe all TA's and WS6's are the same height.
To be sure, check the RPO codes on the door. If the RPO code is there, but the badge isn't, I'd start questioning on what happened to the bade (fell off, damaged and removed, stolen, accident and bumper was replaced, etc)
My WS6 does not sit any lower than a standard TA. It's exactly the same height. Some Firehawk's will sit lower, depending on the suspension. But I believe all TA's and WS6's are the same height.
To be sure, check the RPO codes on the door. If the RPO code is there, but the badge isn't, I'd start questioning on what happened to the bade (fell off, damaged and removed, stolen, accident and bumper was replaced, etc)
Trending Topics
#8
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2005
Location: Maryland; USA
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by DrEvyl
All WS6s should have the badge on the passenger side rear of the vehicle, just below the right tail light.
You can also look on the door sticker on the driver's door... you will see the code WS6 on there.
![](http://pics.evyl.org/PurpleTA/BPM_98-WS6_0.jpg)
You can also look on the door sticker on the driver's door... you will see the code WS6 on there.
![](http://pics.evyl.org/PurpleTA/BPM_98-WS6_0.jpg)
Man that purple color is awesome!!!
back on topic.
WS6 badge
WS6 rpo code
WS6 hood
is what i made sure my car had before i shoved the money in the dealers face
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
yeah i dont think ride height was any different and if it is i'd hate to see a stock trans am
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
#9
teh PuRpL3z
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by MdFormula350
Man that purple color is awesome!!!
![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
Originally Posted by MdFormula350
yeah i dont think ride height was any different and if it is i'd hate to see a stock trans am ![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
#10
TECH Regular
Join Date: Oct 2002
Location: Edgewood, MD
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by DrEvyl
Nope, ride height really isn't any different, they all have the 4x4 motif going. Only cars that sit a little lower are Firehawks with the Bilstein package.
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I think they (WS6's) sit alittle lower....I was working on my buddies 2001 T/A and jacked it up from the k member and I had a 1 inch thick block of wood on the jack...then I pulled in my 2002 WS6 and the jack would not fit with the block of wood, I had to leave the wood off. My cousins 2001 WS6 was the same, the jack alone barely fit under the k member....a few weeks later I tryed another buddies 2001 T/A and the wood fit on the jack
I only say it sits lower because of what I have seen. At least the k member sits 1 inch lower on the 2 WS6's vs the 2 T/A's I have tryed
1 WS6 has 17in Firehawks, 1 WS6 has 17in factorys and the T/A's both have 16in factorys.....all stock suspensions. As far as I know the 16 and 17's are almost identical in height, so that should not make a difference......but there is a 1 inch difference in the 4 I have seen at the k member.
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
1 WS6 has 17in Firehawks, 1 WS6 has 17in factorys and the T/A's both have 16in factorys.....all stock suspensions. As far as I know the 16 and 17's are almost identical in height, so that should not make a difference......but there is a 1 inch difference in the 4 I have seen at the k member.
#14
teh PuRpL3z
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by MdFormula350
maybe one had weaker springs or was used harder??? either way the factory height needs at least a prokit lowering stance if not more!
I'm not going to lower my WS6, though, the car is staying bone stock... so I guess I will have to get used to people giving me a hard time about the ride height.
#15
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here is another ws6 question.I just bought an 01 WS6.It has the WS6 badge in the rear and the rpo code WS6,WS9 on the door sticker,but my wheels do not have WS6 on the center caps should they ?I am guessing not .Has anyone ever had WS6 embroided in the headrest.I would like to see one.
01 ws6,silver,auto with yank 4000 stall,12 bolt ,3:73,TA rear end cover,,complete BMR chrome moly suspension bolts on's,k&n,slp lid,bg ram air mod,mac headers,off road y pipe,magnflow catback,MSD wires,NGK plugs,smooth bellows,slp mass air flow,throttle body coolant by pass,160 stat,
2.02 1.575 manly racemaster valves with fully polished and ported heads Trend Fully hardend pushrods, COMP TI retainers, Dual Valve spring's
custom comp 228 236 588 578 114 ,ARP hardware,New Z06 gaskets.Around 400 RWHP and 360 torque.
01 ws6,silver,auto with yank 4000 stall,12 bolt ,3:73,TA rear end cover,,complete BMR chrome moly suspension bolts on's,k&n,slp lid,bg ram air mod,mac headers,off road y pipe,magnflow catback,MSD wires,NGK plugs,smooth bellows,slp mass air flow,throttle body coolant by pass,160 stat,
2.02 1.575 manly racemaster valves with fully polished and ported heads Trend Fully hardend pushrods, COMP TI retainers, Dual Valve spring's
custom comp 228 236 588 578 114 ,ARP hardware,New Z06 gaskets.Around 400 RWHP and 360 torque.
#16
teh PuRpL3z
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Brianss1
Here is another ws6 question.I just bought an 01 WS6.It has the WS6 badge in the rear and the rpo code WS6,WS9 on the door sticker,but my wheels do not have WS6 on the center caps should they ?I am guessing not .Has anyone ever had WS6 embroided in the headrest.I would like to see one.
If you have the '98-'00 wheels.. like these, they should say "WS6" on them
![](http://g9.evyl.org/F-Body_Gathering/Pewter_WS6_Formula_b.jpg)
If you have the other wheels, like this car... they say "Pontiac" on them, with the red arrowhead in the center.
![](http://pics.evyl.org/FBG8/zeusjr_a.jpg)