GTO Steering Wheel Hub Fabrication, Who wants in?!!
#61
#62
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2008
Location: Cincinnati
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
im sorry. i had no idea there would be this much interest in these.. I will check with my buddy this week and let you know how things pan out.
As for Buzzman, i will get back to you when the machining is done and the hub is ready to go..
"My first gto" is next in line for this..
Going on however many days ? since i installed this, zero issues. works bad ***.. Clicking the turnsignals off by hand is so trivial also as is a horn.
As for Buzzman, i will get back to you when the machining is done and the hub is ready to go..
"My first gto" is next in line for this..
Going on however many days ? since i installed this, zero issues. works bad ***.. Clicking the turnsignals off by hand is so trivial also as is a horn.
#63
im sorry. i had no idea there would be this much interest in these.. I will check with my buddy this week and let you know how things pan out.
As for Buzzman, i will get back to you when the machining is done and the hub is ready to go..
"My first gto" is next in line for this..
Going on however many days ? since i installed this, zero issues. works bad ***.. Clicking the turnsignals off by hand is so trivial also as is a horn.
As for Buzzman, i will get back to you when the machining is done and the hub is ready to go..
"My first gto" is next in line for this..
Going on however many days ? since i installed this, zero issues. works bad ***.. Clicking the turnsignals off by hand is so trivial also as is a horn.
Thanks ....And you will have the First 8 second pass with One of your Kits on My GTO......Frank
#65
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2008
Location: Cincinnati
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
the rear end is cut out because i am in the middle of building a functional rear diffuser.. Here is a concept rendering on some random as gto picture
before the new floor pan that has been welded in, seam sealed, undercoated/painted, and finalized so the trunk looks stock, just has no spare tire well anymore to allow room for the diffuser.
just some random *** new shots of my car if anyone is curious after jlinks/seeing the fab work..
Thanks Justin... Talked to photoguy. We are shooting your car as soon as my side skirts are painted and my car is cleaned off.. My harrop cover arrives monday so then the rear diffuser gets assembled..
my first gto... if you knock some cash off some rocksand solid motor mounts, i can knock some money off the hub If i was not paying my friend for the materials and time, id trade you with a little bit of cash .. heehee (you are in charge of that joint right, hell im probably in left field with that assumption, lol)
Last edited by RX666; 09-12-2010 at 03:01 AM.
#66
the rear end is cut out because i am in the middle of building a functional rear diffuser.. Here is a concept rendering on some random as gto picture
before the new floor pan that has been welded in, seam sealed, undercoated/painted, and finalized so the trunk looks stock, just has no spare tire well anymore to allow room for the diffuser.
just some random *** new shots of my car if anyone is curious after jlinks/seeing the fab work..
Thanks Justin... Talked to photoguy. We are shooting your car as soon as my side skirts are painted and my car is cleaned off.. My harrop cover arrives monday so then the rear diffuser gets assembled..
my first gto... if you knock some cash off some rocksand solid motor mounts, i can knock some money off the hub If i was not paying my friend for the materials and time, id trade you with a little bit of cash .. heehee (you are in charge of that joint right, hell im probably in left field with that assumption, lol)
#68
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2008
Location: Cincinnati
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
I NEED A HEAD COUNT.
1.
2.
3.
4.
5.
These are 180.00 Each..
They will come to your house, and all you need to do is bolt them onto your car and bolt the momo/sparco steering wheel onto them, or bolt the nardi adapter off ebay along with the nardi wheel like i did..
I will have more made if anyone wants one!
Im sorry since im not a vendor, but this is more of a fabricator dude helping out other enthusiasts. I am not making these for a business. I have no time for that ****!
Please respond here asap if you want one! FOR SURE.
1.
2.
3.
4.
5.
These are 180.00 Each..
They will come to your house, and all you need to do is bolt them onto your car and bolt the momo/sparco steering wheel onto them, or bolt the nardi adapter off ebay along with the nardi wheel like i did..
I will have more made if anyone wants one!
Im sorry since im not a vendor, but this is more of a fabricator dude helping out other enthusiasts. I am not making these for a business. I have no time for that ****!
Please respond here asap if you want one! FOR SURE.
#78
TECH Regular
iTrader: (11)
Buzz
#79
Registered User
Join Date: Dec 2011
Location: Wisconsin
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hub Fabrication
I am new to this forum and I know the thread is outdated but I'm interested in getting a steering wheel hub and there aren't any options out there. Would a fabrication like this still be available?