Track trip After mods. Input wanted
#41
GCONNOYER i know at my power level i shouldnt have broke that ****. it didnt wheel hop i know what that feels like it just hooked and broke i didnt make it past the tree. also the shaft was a clean break and it broke at a downward angle so that leads me to the carrier bearing bound up which caused it to break. i broke where the main shaft goes smooth and starts to spline for the output
Last edited by 04gto5.7; 11-10-2011 at 08:35 PM.
#42
11 Second Club
iTrader: (1)
So if i get the big side wall tire i shouldnt break anything? Even if i put the trex in my car? Also all i can find on jegs is 15 inch tires. and no 28x10s
How about these tires?
http://www.tirerack.com/tires/tires....O&autoModClar=
How about these tires?
http://www.tirerack.com/tires/tires....O&autoModClar=
Here's the wheels you want
http://www.jegs.com/i/JEGS-Performan...ductId=1231935
And here's the tires you want.
http://www.jegs.com/i/Mickey-Thompso...oductId=746895
Might want to try and find something a bit more narrow if you're on stock springs or dont have drag bags.
Here's what it looks like
#44
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Mar 2007
Location: Indiana
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
http://www.youtube.com/watch?v=G_rEYmYnstE
This is vs an 02 wrx that went 13.4 at 105 on 12 psi. Hes now tuned for 17psi
This is vs an 02 wrx that went 13.4 at 105 on 12 psi. Hes now tuned for 17psi
#45
what kind of suspension mods do you have to fit that i wish i could see your pics but im in afganastan and cant see it due to the crappy internet. so i guess im asking does it rub or anything like that
#46
12 Second Club
iTrader: (3)
Join Date: Apr 2004
Location: Grand Rapids, Michigan
Posts: 1,512
Likes: 0
Received 2 Likes
on
2 Posts
Just get some Mazda MPV Airlift drag bags and you should be good to go with those wheels/tires. One thing to be aware of is "lane walk". It's more like chit your pants sometimes if you get it. The back end will start feeling like it's coming out at the fast end. Definitely will wake you up. Bias plies for the front will help a lot. They don't recommend running bias and radial on the car at the same time. Some have gotten the spare tire wheel and some skinny bias front runners or you can do matching "Stars" like Greg did. That will also give less weight and rolling resistance and can help a lot too.
#47
TECH Apprentice
iTrader: (1)
I also recommend replacing the shitty stock rear springs regardless of whether you track it or not. It would have been my first mod had I known how much body roll it corrected. I have Pedders 0-Drops and the airlift bags...I also have a very nice writeup on the install at ls1gto.com.
#49
11 Second Club
iTrader: (1)
Just get some Mazda MPV Airlift drag bags and you should be good to go with those wheels/tires. One thing to be aware of is "lane walk". It's more like chit your pants sometimes if you get it. The back end will start feeling like it's coming out at the fast end. Definitely will wake you up. Bias plies for the front will help a lot. They don't recommend running bias and radial on the car at the same time. Some have gotten the spare tire wheel and some skinny bias front runners or you can do matching "Stars" like Greg did. That will also give less weight and rolling resistance and can help a lot too.
ALOT of people run the factory spare wheels (which is perfectly fine) and actually run the spare tire.
I wanted to whole setup so I went ahead and bought it all off Jegs. Probably totaled $1200ish brand new.
#53
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Mar 2007
Location: Indiana
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Would these fit under my car on the stock 17in wheel?
http://www.mickeythompsontires.com/s...?item=ETStreet
http://www.mickeythompsontires.com/s...?item=ETStreet
#55
I run Hoosiers 17 drag radial and they hook. They hook well enough I blew through a monster stage 3.5 my first run. No wheel hop though. You don't need a bias ply tire if you get the right radial.