When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking to trade my Build Fbody for a C5 or ls2 C6
Looking to trade for a C5 maybe c6.
Always wanted a C5, and I'm almost done with my other FBodys build. Would like to trade for a clean c5 or ls2 c6. Wheels Stay with me. I can Have the Car on C6z Wheels with new tires for you. or you can put your Vettes wheels on it.
1993 Camaro z28
108,000 miles on the Body
3" Cowell hood
ShortBlock:
GM l99/ls3 Block
Motor was assembled by:
Scroggins Machine Shop in Houston
Balanced and Blueprinted
4" Callie's Compstar Crank
6.125 Manley H-Beam Rods
Wiseco 4.070 bore Pistons
Upgraded Pins
Upgraded GFX Rings
ARP Main Studs
ARP 2000 Rod Bolts
King Bearings
Rings are gapped for a 300 shot
Compression of the motor is 12.2-1
Top End of the Motor:
799/243 Heads
Milled .020
Ported/Polished by Daniels Speed and Perf
ARP Head Studs
Ls3 Head Gaskets
Ported Fast 92 Intake Manifold
Nic Williams 92 TB
LS7 100 MM Mass air Sensor
Custom 4" CAI
New LS7 Lifters
New GM Lifter Trays
Hardened 7.400 Pushrods
.660 lift Dual Springs
GM Rockers with Comp Trunion Upgrade
Custom Grind Comp Nitrous Cam - Have Specs for people interested
Exhaust:
17/8 Stainless Steel headers- Speed Eng
Custom 3.5" Stainless y-pipe
Custom 3" stainless Exhaust over the axle
Magnaflow Muffler
Dumped under the car
04-13-2016, 12:42 PM
Looking to trade my Build Fbody for a C5 or ls2 C6 
