When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Back history on my car.. 2002 SS SOM. Bought bone stock in 2009 from an older guy with 70k miles. Did heads/Cam/Intake/Spray in 2011. 100 shot. street raced it mainly.. kept needing(Wanting) more and more power so I kept upping the shot. finally after hitting it with a 275 shot for 3 years ringlands finally said no more lol Let th car sit the last year while I Built m 1993 z28. Finally starting on it again. Picked up an LS2 block and started unbolting **** this week. heres some progress. Motor will be back from machine shop in the next few weeks .
Car went 10.80 on old setup on a 100 shot. never sprayed more than that at the track(sadly)... Heres that Video:
4 bottles almost every weekend for 2-3 years lol i had 2 kits on the car. 150 plate hit and a 125 nozzle lol wasn't always a 275. but some of the TT cars id spray well ALL OF IT
4 bottles almost every weekend for 2-3 years lol i had 2 kits on the car. 150 plate hit and a 125 nozzle lol wasn't always a 275. but some of the TT cars id spray well ALL OF IT
You got more nads than me...150 is all I dare on mine (it is a 17K motor!). I'm putting mine on the back burner for a while and am working on this for my son...https://ls1tech.com/forums/generatio...ld-thread.html
You got more nads than me...150 is all I dare on mine (it is a 17K motor!). I'm putting mine on the back burner for a while and am working on this for my son...https://ls1tech.com/forums/generatio...ld-thread.html
I'm only 21, so I basically have to push the limits of everything I can lol
Have you decided what heads you're going to put on her?
Have a set of 706's getting hand ported. Bigger valves 2.02/1.60's and getting decked .020. Trying to get 11.0-1 compression. and have an LS2 intake Getting ported by yours truly
How did you get a ls3 crank with a 24 tooth wheel? Did you swapped the wheel? How did they resize the rods? Are ls3 rods not fracture caps?
I love the stripper pole in the couch area….reminds me of college. Those pistons look like the Speed-pro, I just put them in a LS2 I built for a friend….They measured and fit perfect.
How did they resize the rods? Are ls3 rods not fracture caps?
There are now aftermarket bearings that exist that allow you to resize the big end of a cracked cap rod. The bearing outside diameter is slightly larger ( i thing .002) than stock. No cap cutting required, just hone it round to spec of new bearing and away you go. Do a search on here, I think the Clevite part # is 1776.
How did you get a ls3 crank with a 24 tooth wheel? Did you swapped the wheel? How did they resize the rods? Are ls3 rods not fracture caps?
I love the stripper pole in the couch area….reminds me of college. Those pistons look like the Speed-pro, I just put them in a LS2 I built for a friend….They measured and fit perfect.
Yep Speed Pro! and I bought a reluctor for the ls3 crank