Mercier

iTrader: (15)

Category: Accessories
Price: $85
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): LA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

EDIT: I apologize for he confusion. This thread started as Comps and I decided to sell the rest of my Harland Sharp kits as well due to high interest. Please read the posts below about those.

So it's $90 shipped for the Harland Sharp trunnion upgrade.
$100 shipped if you want the shafts included.
This is to 48 states. Somewhere else, $80 and $90, respectively plus actual shipping.
If you are local, $80 and $90 cash, respectively.

Just what the title says. 16x trunnions, 32x bearings, 32x snap-rings, 16x upgraded bolts 2x installation washers, instructions. All individual bags of parts are sealed, unopened. Box obviously opened to take pics.

Bought 20 sets of trunnions earlier this year to upgrade and sell rockers and this is just unused stock. Nothing wrong with them other than a couple of light grease spots on the box from moving them around the shop.

These retail $130-$140 depending on the source. I probably paid $130.

$85 shipped anywhere in the 48 states, $75 + actual shipping anywhere else.

If you like, add $75 and I'll stick these in a nice set of used LS1/2/6 style rockers or $100 for LS3/L92-style rockers to give you a complete setup. You would receive rockers with trunnions - keep your own rockers.

http://www.briantooleyracing.com/com...union-kit.html

bluebommer07

iTrader: (7)

i see you in baton rouge how much if picked up?

EddieGoesFast

I'll take a set for the hell of it

Mercier

iTrader: (15)

Sorry guys; I should have been more clear. This set was the last of 20 that I bought. This is sold.

I do have several sets of Harland Sharp upgrades. These have a harder trunnion material than the Comps as well as a thin steel washer that sits underneath the retaining clip. Same bearings and clips as all the other guys. Also upgraded bolts.

I could let these go for $5 more shipped.

And if in BR or near, $80 cash per set.

Mercier

iTrader: (15)

This is what the HS kits look like installed. I can also change the kit for the shafts if you like for another $10. I may only have "black chrome" shafts left but they are pretty cool and functional, too.

91LT16SpeedFormula

iTrader: (60)

Does this work on the LS3 rockers also? Is the shaft style Harlands any better then the Comp upgrade?

Mercier

iTrader: (15)

These should work for cathedral, LS3/L92, LS7, etc. The shafts are my own unique thing. But they work for all. For the shafts, the trunnions are bored and there is enough room in each rocker that the shaft floats a little between them. Could be loctited in for a firmer fit but I haven't gone there yet. Just don't have time to pursue the endeavor anymore.

The trunnions are a harder material than the Comps and they also come with a thin steel washer that goes under the snap ring which tightens things up a little and prevents the snap ring from digging in. Not saying it's a big problem but it's free insurance.

The bearings and snap rings are the same as Comp and others.

Thanks for looking.

Mercier

iTrader: (15)

Mercier

iTrader: (15)

Everyone is shipped. Will post another thread to sell the rest.

Thanks!!

eurojeff

What kits are now avail.?

need4speed069

iTrader: (3)

I would like to know too

rt338b

iTrader: (4)

any left? If so pm me

fumundadantake

id like one with shafts any left?

truckdoug

iTrader: (25)

i have a set of his shafted rockers on my turbo motor with an xtreme rpm comp cam. i beat on it like it owes me money, and just checked all the bearings and trunnions when i switched shortblocks....looks like the day they went in.

ask about his parkerized rockers too they are the business!

Mercier

iTrader: (15)

Thanks Doug! Keep beating away!

EDIT: well that came out wrong..but I'm sticking to it.

I'm out of these for now. I do have some of the Parked sets ready to assemble. PM if you have interest, otherwise I'll surface again when i have more time.

Thank you all for your interest!!

Chris