When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I've decided to upgrade my tranny. I'm replacing the direct drum with the stronger 4l80 drum with the good sprag. I'm also running a Tbrake so I need the bleed hole behind the piston. The drum has what looks to be a bleed hole already, is this really what it looks to be here in this pic? Was tired of short shifting to be easy on the roller clutch.
I did the same as you wth the 80e drum/sprag and drilled a second as per my instructions
Yea, I went ahead and pulled the piston and drilled another hole. Was just trying to avoid pulling the piston, but as it turns out....I cant use that piston anyway.