Junk Pile 4.8 freshen up
#141
ModSquad
iTrader: (6)
#142
No. It was my scrap heap buildup (described in the prior post) that I gathered parts for about four years ago and challenged myself to be as cheap as possible. Broke it in on my run stand but could NOT sell it for 1800 or even 1600. After about a year of sitting on it I gave it away for 1400; bout 75 or a Hundred more than I had into it. So this buddy of mine who already owns a 71 GTO that has my old 502 BBC in it wanted to resurrect his high school third gen. Whallah. With an HEI distributor a 700 DP Holley and 1-5/8” headers with flow crapper single exhaust. It runs well. He loves it. He also bought an 800 dollar 350 from me for an 84 MCSS and that Katech headed LS1 I just did that build thread on
That engine is now going into his 1997 thirtieth Camaro. White w/orange stripes. M6 car too
That engine is now going into his 1997 thirtieth Camaro. White w/orange stripes. M6 car too
#143
LS1Tech Premium Sponsor
iTrader: (2)
Sounds like a great combo to me ....I'd do the roller cam also
Ran a set of the L98 (14101083) castings on a restricted stock car engine I built about five years ago. 364"/10.8:1/.500" lift flat tappet solid/Vic Jr./750
Un-ported (rules) and opened up for 2.02"/1.60" valves with a throat hog
worked well but never had them flowed
Only negative is they're lightweight castings which when coupled with the siamese bore block......well....U kno....
Ran a set of the L98 (14101083) castings on a restricted stock car engine I built about five years ago. 364"/10.8:1/.500" lift flat tappet solid/Vic Jr./750
Un-ported (rules) and opened up for 2.02"/1.60" valves with a throat hog
worked well but never had them flowed
Only negative is they're lightweight castings which when coupled with the siamese bore block......well....U kno....
#144
No. It was my scrap heap buildup (described in the prior post) that I gathered parts for about four years ago and challenged myself to be as cheap as possible. Broke it in on my run stand but could NOT sell it for 1800 or even 1600. After about a year of sitting on it I gave it away for 1400; bout 75 or a Hundred more than I had into it. So this buddy of mine who already owns a 71 GTO that has my old 502 BBC in it wanted to resurrect his high school third gen. Whallah. With an HEI distributor a 700 DP Holley and 1-5/8” headers with flow crapper single exhaust. It runs well. He loves it. He also bought an 800 dollar 350 from me for an 84 MCSS and that Katech headed LS1 I just did that build thread on
That engine is now going into his 1997 thirtieth Camaro. White w/orange stripes. M6 car too
That engine is now going into his 1997 thirtieth Camaro. White w/orange stripes. M6 car too
I still have yet to bring you a motor, you keep building what I need before I have a chance!
#145
it actually has a 750 dp Holley, 1 3/4 hooker long tubes, and a single 4” mufflex exhaust with a spintech muffler. 3000 rpm tci converter, th350 trans, and if I remember correctly 3:42 rear gear.
I still have yet to bring you a motor, you keep building what I need before I have a chance!
No wonder it runs so well.......
bet I was thinking of the stuff on that MCSS engine....
#146
Yeah that’s all junk. Edelbrock carb, flow tech shorty headers, and a summit brand exhaust. Still runs perfect though and will spin one wheel really well through the open rear haha
#147
Well. Picked up the block about two hours ago and WW
Quick turn around and the cylinders turned out great !!!!
Gonna clean and paint. Post picks later too
Funny story; local store didn’t have the hammered gray paint I wanted
So brown it is instead LMFAO “Little Brownie”.
It now has a new project name ......ahhh. Mods ?????
Quick turn around and the cylinders turned out great !!!!
Gonna clean and paint. Post picks later too
Funny story; local store didn’t have the hammered gray paint I wanted
So brown it is instead LMFAO “Little Brownie”.
It now has a new project name ......ahhh. Mods ?????
#148
TECH Senior Member
Ahhh... it'll still look alright! I think.....
#153
TECH Senior Member
That turned out pretty nice!
#156
Future owner jokingly called it "The Turd"....cause he plans to feed this thing with 20-plus pounds of Borg Warner nasty....he's been dying to get back to a boosted combo since him AND his wife drove EIGHT second turbo and supercharged street bikes....
Silly fella indeed.....
BTW Leroy Brown was BAD BAD.......IIRC....
#159
TECH Senior Member
I think it looks pretty good!
#160
TECH Fanatic
iTrader: (8)
This is our reworked junkyard 5.3L we nicknamed "Quagmire", I just clear-coated right over the rust and oxidization... and then made some lavender valve covers to hide that ugly as well. Oh, that ugly unwanted paint is on sale? Perfect.
We should hang out and paint stuff some time.
We should hang out and paint stuff some time.