Just bought an MGW from a guy here on tech. I am LIVID
#1
Just bought an MGW from a guy here on tech. I am LIVID
So I just bought an MGW from a guy here on tech for TOP dollar.
I installed it today and well, take a look for yourself.
Just so you all know, that bolt is LOCKED down.
I am very upset. It moves under the washer but it is locked down!
I installed it today and well, take a look for yourself.
Just so you all know, that bolt is LOCKED down.
I am very upset. It moves under the washer but it is locked down!
#3
I did not expect this to be a problem. I took the bolt out and there doesn't look to be anything I can see? I don't know what I am looking for
#7
Rubber bushing looked fine. I added a washer under the washer with the bolt. I tightened it down and it still has a bit of play. I do not understand. I emailed MGW and I am unsure what is going on.
Trending Topics
#9
I contacted MGW and he said the unit must be old and the bushing is worn out and the bolt washer is worn out. Basically I was sold garbage
#16
12 Second Club
iTrader: (2)
You are missing a washer on the anodized base. There is a large metal washer and then the white plastic washer on top of it. The white washer is probably worn a bit too.
Go to the hardware store and get new washers, and you can probably shorten the bolt by a few threads as well to give yourself a little more tightening.
Go to the hardware store and get new washers, and you can probably shorten the bolt by a few threads as well to give yourself a little more tightening.