man2004

iTrader: (1)

Is there a front license plate grill/mesh insert to cover the hole made in the front bumper cover to let air flow to a single front mounted intercooler for a Procharger (more efficient than the small twin intercoolers). I have seen pictures of nice silver grill or mesh inserts and one pic of a black mesh insert. Are these custom made or are they for sale online? The black mesh would be perfect for my black 98 TA. But, I could deal with the silver grill or mesh as well. The pics I have seen look like the front "bird" filler was cut out along the edges and a grill or mesh was incorporated so that the filler plate could be re-installed and still allow air to flow throug the hole made behind it in the bumper cover cut-out. Otherwise, the intercooler is visible through the hole without the grill or mesh insert covering the hole. Any input would be greatly appreciated!

jrpimp00

iTrader: (17)

I cut my own instead of buying one. I did it all in about 4 hours including painting.

99WS6MAN

iTrader: (2)

Sweet ... looks good!

AiDRocks

iTrader: (13)

Would you happen to have one for sale?

Rise of the Phoenix

iTrader: (27)

What did you use to cut the license plate filler/cover?

94blackonblack

bump, would like to know, also how did you attach the mesh and what kind is it?

94blackonblack

.bump, would like to know, also how did you attach the mesh and what kind is it?

jrpimp00

iTrader: (17)

i used a dremel with the rotary bit and a sanding roll to clean the edges. Mesh was a sheet I got from home depot. I used epoxy to make it stay in place

94blackonblack

Did you have to paint the edges of the cover after the edges were sanded?

jrpimp00

iTrader: (17)

Yes, i repainted the whole thing to revive it any way,