Built LT1 4L60E w/ NTC Billet Converter
Built LT1 4L60E w/ NTC Billet Converter Category: Racing Parts
Price: $1200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): TX
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LT1/LT4
LS Engine?: Non-LS Part
Add 3% for Paypal fees.
Also willing to trade for the following LS parts for Fbody:
Fbody Oilpan, pickup, etc.
Fbody Accessories
Fbody Wiring Harness
Headers
FRESH LT1 4L60E w/ NTC 245mm Billet Converter - $1200 Shipped
- Converter will be made to whatever stall speed you would like. Can call and talk to NTC guys about what would be best for your setup and they will take care of ya.
- Converter comes with normal warranty from NTC just like buying a new one would.
- 4L60e has Beast sun shell, Corvette servo, ZPAK, etc.. Easily 400+ HP capable. 0 miles, only tested on tranny dyno.
- Will send video of transmission and converter running on tranny dyno showing all gears working and line pressure in each gear once you choose your stall size so the guys at NTC can finish the converter.
**PICS SOON**
TPIS Billet Timing Cover - $200 Shipped
Last edited by Mooneyed; Nov 22, 2015 at 04:59 PM.
On The Tree
Joined: Feb 2009
Posts: 134
Likes: 0
From: New Orleans ,LA
Bump. Heads/Intake have been sold.
Need this stuff gone so I am willing to make some killer deals. Also willing to trade for LS parts:
Cam(23x/23x .59x/.59x) or something close to that.
Fbody Accessories
Fbody Wiring Harness
12-Bolt
Suspension[tubular](Torque arm, SFC, LCA, etc.)
Nitrous Kit
Headers
Need this stuff gone so I am willing to make some killer deals. Also willing to trade for LS parts:
Cam(23x/23x .59x/.59x) or something close to that.
Fbody Accessories
Fbody Wiring Harness
12-Bolt
Suspension[tubular](Torque arm, SFC, LCA, etc.)
Nitrous Kit
Headers
Trending Topics
Engine has been sold.
0 miles, brand new unit from GM.
With a $40 spacer and some longer bolts, i believe so.
More info here:
https://ls1tech.com/forums/conversio...l#post12571356
0 miles, brand new unit from GM.
With a $40 spacer and some longer bolts, i believe so.
More info here:
https://ls1tech.com/forums/conversio...l#post12571356
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
LOL, no need to freak out everyone. I've been a member here for a very long time and wouldn't ruin my name over $57... (Spraydz is my old username, can post to verify if anyone doubts.)
I have replied to the PM's and am working to either fully refund or send the the PCM to 33Chev at shipping cost only since I screwed this up so bad..
rjc1629: Sorry I missed ya. LMK, if you want it when you get back into town.
I have replied to the PM's and am working to either fully refund or send the the PCM to 33Chev at shipping cost only since I screwed this up so bad..
rjc1629: Sorry I missed ya. LMK, if you want it when you get back into town.
Ive got a next to new NOS LS Wet plate kit, AND probably the best header/exhaust combo you can buy for an fbody! https://ls1tech.com/forums/parts-cla...nce-parts.html