Any tuners in north ga?
01-14-2018, 06:54 PM
#1
ModSquad
Thread Starter
iTrader: (6)
Any tuners in north ga? Guys, I am running into walls with my tuning. Damon at Mast sent me a startup tune, which runs the car, but my idle and low speed stuff is way off. Basically Mast doesn’t have time to remote tune me. I’m running Mast electronics, which is simple enough to operate, But most shops won’t touch it. I need a good tuner.
Anybody semi local to me out there want to lend a hand, and make some cash?
Not looking to put on a dyno right now to work on the idle and off throttle stuff, but I will if we can coordinate that.
I’ve used Vengeance on several builds with GM electronics, but I can’t even get mike to call me back on this deal. I don’t want to remove the Mast stuff, and go GM electronics, but I will if I have to. This is a high end build, and I would love to drive it. Pm me if your experienced and serious.
Anybody semi local to me out there want to lend a hand, and make some cash?
Not looking to put on a dyno right now to work on the idle and off throttle stuff, but I will if we can coordinate that.
I’ve used Vengeance on several builds with GM electronics, but I can’t even get mike to call me back on this deal. I don’t want to remove the Mast stuff, and go GM electronics, but I will if I have to. This is a high end build, and I would love to drive it. Pm me if your experienced and serious.
01-16-2018, 07:18 PM
#3
ModSquad
Thread Starter
iTrader: (6)
01-16-2018, 07:43 PM
#4
TECH Senior Member
In the tuning biz, never heard of Mast..... HUH?
01-16-2018, 09:18 PM
#6
I will talk to my neighbor. He has done a lot with Holley and Haltech systems, but he might be interested in something different. Some of the old fueling tables from his '70 Vette with a 434 might be useful. He also has an MD250 dyno in his garage, so that might help. I'll just need to find out if he is interested.
01-16-2018, 09:55 PM
#7
ModSquad
Thread Starter
iTrader: (6)
I will talk to my neighbor. He has done a lot with Holley and Haltech systems, but he might be interested in something different. Some of the old fueling tables from his '70 Vette with a 434 might be useful. He also has an MD250 dyno in his garage, so that might help. I'll just need to find out if he is interested.
Trending Topics
01-16-2018, 10:49 PM
#8
TECH Senior Member
I LOVE how these forums work.....
01-17-2018, 09:46 AM
#9
ModSquad
Thread Starter
iTrader: (6)
01-18-2018, 07:32 PM
#10
I just talked to my neighbor. He said he would be very interested in working with the Mast software for the first time. Like I said before, he has mostly dealt with Holley's various software and a few versions of Haltech. Usually I dealt with any HPT that we messed with, and one of our other friends would do Ford related Sniper tuning, along with occasional AEM stuff. Just to be upfront, this was all non-commercial tuning. It just centered around his house because he is the only person most of us know with a dyno in his home garage. If you are interested, PM me for details.
01-18-2018, 08:20 PM
#11
TECH Senior Member
This sounds like a guy who does this because he LIKES IT! Our kinda guy.....
01-18-2018, 08:26 PM
#13
TECH Senior Member
WHOA!! There ya go! Get this guy on the job! lol
01-19-2018, 08:14 PM
#15
ModSquad
Thread Starter
iTrader: (6)
I just talked to my neighbor. He said he would be very interested in working with the Mast software for the first time. Like I said before, he has mostly dealt with Holley's various software and a few versions of Haltech. Usually I dealt with any HPT that we messed with, and one of our other friends would do Ford related Sniper tuning, along with occasional AEM stuff. Just to be upfront, this was all non-commercial tuning. It just centered around his house because he is the only person most of us know with a dyno in his home garage. If you are interested, PM me for details.