first pass 9.68 - Turbo 370ci
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Best
60ft - 1.41
1/8 - 6.14 @ 113
1/4 - 9.67 @ 141
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/307289_10150829131785018_535410017_20695826_245720522_n.jpg)
Engine: Forged 9.6:1 370ci. Bowl ported (by me) 317 heads. Speed inc TU1 cam. Vic jr intake, low pro elbow, Billet Atomizer 160# high z injectors, stock PCM, HP tuner 2 bar, Dual walbro 255's, E85,
Turbo: PT76GTSH, home made truck manifold setup. Ebay 4" thick intercooler. Running off gate pressure of 18psi
General tune: A/F just being dialed in, into boost was high 10:'s loading up a little just before 5000rpms. Leaning it out started picking up MPH. Untill traction was no more. Full timing at 14.5 degrees.
Car: raceweight 3700lbs (with me), factory shocks, springs, homemade 9" rear end, homemade TQ arm, 3.50 gears, 275/60/15 MT drag radials, JW Pro glide, BTE converter. Home made anti-roll bar.
HP: Never seen a dyno, never will. Road/track tuned. HP/MPH calculator says at 141mph it has 849hp.
Logs show the best run (3rd run) Leaving at 11psi and shifting out of 1st at 5500rpms. I have a transbrake but didnt use it. This was its first time out and wanted to be conservative. Tried leaving at more boost (2nd pass, timeslip not there) and tires just blew off. 4th pass pulled more fuel out on the low-mid rpms and couldnt hook anymore..![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/314597_10150899849385018_535410017_21208677_467370519_n.jpg)
With me and my helmet in the car it weighs 3700.. this is with out me in the car.
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/300716_10150899849680018_535410017_21208680_956988498_n.jpg)
First pass
http://www.youtube.com/watch?v=IEmU8SCAbOc
third pass
http://www.youtube.com/watch?v=mM1sF..._order&list=UL
A few pics of everything.
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/306375_10150859961755018_535410017_20912535_840443020_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/222196_10150563389325018_535410017_17904860_6403859_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/189579_10150466493240018_535410017_17543203_8117225_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/189721_10150466493660018_535410017_17543210_3129622_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/208522_10150548388705018_535410017_17749410_176412_n.jpg)
My highly organized garage HAHA
60ft - 1.41
1/8 - 6.14 @ 113
1/4 - 9.67 @ 141
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/307289_10150829131785018_535410017_20695826_245720522_n.jpg)
Engine: Forged 9.6:1 370ci. Bowl ported (by me) 317 heads. Speed inc TU1 cam. Vic jr intake, low pro elbow, Billet Atomizer 160# high z injectors, stock PCM, HP tuner 2 bar, Dual walbro 255's, E85,
Turbo: PT76GTSH, home made truck manifold setup. Ebay 4" thick intercooler. Running off gate pressure of 18psi
General tune: A/F just being dialed in, into boost was high 10:'s loading up a little just before 5000rpms. Leaning it out started picking up MPH. Untill traction was no more. Full timing at 14.5 degrees.
Car: raceweight 3700lbs (with me), factory shocks, springs, homemade 9" rear end, homemade TQ arm, 3.50 gears, 275/60/15 MT drag radials, JW Pro glide, BTE converter. Home made anti-roll bar.
HP: Never seen a dyno, never will. Road/track tuned. HP/MPH calculator says at 141mph it has 849hp.
Logs show the best run (3rd run) Leaving at 11psi and shifting out of 1st at 5500rpms. I have a transbrake but didnt use it. This was its first time out and wanted to be conservative. Tried leaving at more boost (2nd pass, timeslip not there) and tires just blew off. 4th pass pulled more fuel out on the low-mid rpms and couldnt hook anymore..
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/314597_10150899849385018_535410017_21208677_467370519_n.jpg)
With me and my helmet in the car it weighs 3700.. this is with out me in the car.
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/300716_10150899849680018_535410017_21208680_956988498_n.jpg)
First pass
http://www.youtube.com/watch?v=IEmU8SCAbOc
third pass
http://www.youtube.com/watch?v=mM1sF..._order&list=UL
A few pics of everything.
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/306375_10150859961755018_535410017_20912535_840443020_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/222196_10150563389325018_535410017_17904860_6403859_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/189579_10150466493240018_535410017_17543203_8117225_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/189721_10150466493660018_535410017_17543210_3129622_n.jpg)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/208522_10150548388705018_535410017_17749410_176412_n.jpg)
My highly organized garage HAHA
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/207057_10150548393145018_535410017_17749450_841473_n.jpg)
Last edited by pwrtrip75; 01-03-2012 at 09:21 PM.
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Looks like it takes awhile. lol...
Trending Topics
#8
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I had a nightmare because the manufacturer of them didnt have any injector data for them. Once the car was warm it wouldnt restart. Ed Hutchings helped me with that. Also the fuel pressure needs to be below 50psi, mine is currently higher and it loads up idling a little bit. I got it down from a little higher and it made a world of difference. I need to get a different regulator w/ a bigger return and a bigger return line... then im sure it will idle like stock. Driving around and anything above idle they work perfect.
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Very nice. Couple questions...are those times running with a cutout or all the way through the muffler? And what regulator are you going to go with? Are you using the stock feed for the return line? Oh, and congrats on getting into single digits!
Last edited by Subliminal Hit; 02-18-2012 at 09:38 PM.
#13
TECH Enthusiast
iTrader: (4)
Join Date: Apr 2008
Location: Home town Clive,IA current town FORT BENNING GEORGIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
never mind i didnt read the whole thread first my bad, I was just checking because ill be foot braking and kinda worried about the times im going to be running. How much boost did you have off the line
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for the compliments everyone.
I live about an hour from the track and the first time out...I trailered it. I could have drove it but my luck i'd break something.
Yes its though the full exhaust. after the 3" downpipe it goes to a 4" bullet then then to a 3.5" all the way back to a 3.5" dynomax ultraflow oval. Its quiet. Had a 3.5" flowmaster race muffler but kept blowing off due to being restrictive.
Yes, foot brake. I could only get up to 11psi before the tires would break loose.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Yes, foot brake. I could only get up to 11psi before the tires would break loose.
#18
TECH Regular
iTrader: (1)
Join Date: May 2008
Location: Iowa
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
FREAKIN *******! - posts like this make me reconfirm that the DIY can still be done, very cool! Did i miss the details on the 370 motor started as? Did you do all your own work inside it etc?
#20
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its definately got a bit more in it, high 8's I think the weight of the car is going to hold it back from that.... its a pig.
I just finished up with the cage. My friend has a race car shop and tubing bender and bent all the tubing and I welded it in. going to get at getting the interior in tonight. Kind of custom. The entire factory interior will fit back in. Bar wraps around the back seat. Kind of different and custom.
![](http://i121.photobucket.com/albums/o216/green461/TransAm/ca3.jpg)
![](http://i121.photobucket.com/albums/o216/green461/TransAm/ca4.jpg)
![](http://i121.photobucket.com/albums/o216/green461/TransAm/ca2.jpg)
![](http://i121.photobucket.com/albums/o216/green461/TransAm/ca5.jpg)
![](http://i121.photobucket.com/albums/o216/green461/TransAm/ca1.jpg)