For all the 9 sec guys,,, what HP/TRQ you putting down?
#1
Launching!
Thread Starter
Join Date: Dec 2003
Location: Texas, dont mess with us!
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
For all the 9 sec guys,,, what HP/TRQ you putting down?
I know, gearing, weight, suspension, traction, and 28 other things play a great roll in what your 1/4 mile times will be... I was just curious as to what numbers you all are putting to the rears to achieve 9.99s or lower. thanks
-james
-james
#3
TECH Apprentice
Join Date: Aug 2002
Location: Charlotte NC
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
With a little weight loss I think my car could grace the 9's. It was able to run a 6.6@108.72 1/8 full weight letting out for each shift. I don't have dyno numbers with the aftercooler but w/o it it made 629rwhp 696 tq so should be about 675rwhp 750tq
Last edited by SSprayn; 09-08-2004 at 08:04 PM. Reason: nothing
#5
10 Second Club
Join Date: Apr 2004
Location: cleveland, ohio
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I don't have rear wheel hp/tq, but the motor is making 640 hp and 600tq, in that vacinity. Race weight is about 3200 w/ me in it. That's naturally aspriated too
Trending Topics
#8
Originally Posted by Z8'S
JOE YOU FORGOT TO TELL HIM ITS JUST AN LT1!!!
Oh yeah my car has gone 159.84 also. JUST ANOTHER LT1
how much hp WHO CARES! What does it run.
Oh yeah my car has gone 159.84 also. JUST ANOTHER LT1
how much hp WHO CARES! What does it run.
#11
Launching!
Thread Starter
Join Date: Dec 2003
Location: Texas, dont mess with us!
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
I made 550/640 through an auto and a 12bolt. 9.89
With the stock bottom end, i want to be 550RWHP on the squeeze, nothing less. With a forged bottom end, i want to be 650-700 on the squeeze
only real difference is, il be doing it in a 2800lb car with driver
The power to weght ratio is there, just gotta get the suspension worked out, get it to hook, and i should be golden
#13
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
i kissed 9's first time out, i hope to be part of the club soon, but i went almost 139 threw a 400, small tire and about a 150-200 shot first time out with a 2 tenth delay Do to tire size. Im 3525 with driver. 347" motor
#18
9 Second Club
iTrader: (119)
wtf........
this isn't a dick measuring thread!!! the man asked a question to gauge where he might be at, and a bunch of you chime in bragging and showin off!!! if you can't answer the Q, post your times where they should be, in the time slip forum. this is a great question that i would love to have the answer to for the simple reason that i'm only interested in running a 9 sec. time, and i am currently buying a car to setup that way. therefor the answer that is given by those who know, can be REALLY helpful so i know what i need to do.
btw, not trying to sound as harsh as this post seems to be, just making a point. as guys, give us the answer, and get to the point. it's what our minds are programmed for. to those who did, THANK YOU.
later all,
Dave
this isn't a dick measuring thread!!! the man asked a question to gauge where he might be at, and a bunch of you chime in bragging and showin off!!! if you can't answer the Q, post your times where they should be, in the time slip forum. this is a great question that i would love to have the answer to for the simple reason that i'm only interested in running a 9 sec. time, and i am currently buying a car to setup that way. therefor the answer that is given by those who know, can be REALLY helpful so i know what i need to do.
btw, not trying to sound as harsh as this post seems to be, just making a point. as guys, give us the answer, and get to the point. it's what our minds are programmed for. to those who did, THANK YOU.
later all,
Dave
#19
TECH Apprentice
Join Date: Jan 2002
Location: Dallas, TX
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2crzy4u
wtf........
this isn't a dick measuring thread!!! the man asked a question to gauge where he might be at, and a bunch of you chime in bragging and showin off!!! if you can't answer the Q, post your times where they should be, in the time slip forum. this is a great question that i would love to have the answer to for the simple reason that i'm only interested in running a 9 sec. time, and i am currently buying a car to setup that way. therefor the answer that is given by those who know, can be REALLY helpful so i know what i need to do.
btw, not trying to sound as harsh as this post seems to be, just making a point. as guys, give us the answer, and get to the point. it's what our minds are programmed for. to those who did, THANK YOU.
later all,
Dave
this isn't a dick measuring thread!!! the man asked a question to gauge where he might be at, and a bunch of you chime in bragging and showin off!!! if you can't answer the Q, post your times where they should be, in the time slip forum. this is a great question that i would love to have the answer to for the simple reason that i'm only interested in running a 9 sec. time, and i am currently buying a car to setup that way. therefor the answer that is given by those who know, can be REALLY helpful so i know what i need to do.
btw, not trying to sound as harsh as this post seems to be, just making a point. as guys, give us the answer, and get to the point. it's what our minds are programmed for. to those who did, THANK YOU.
later all,
Dave