nosfedgta

I have a set of 4.56's if ya need them. I need some 4.30's if ya got them...

car_fixer

I have a screwey rear end, it uses 12 car gears in a 9 inch housing. I dont have any other gear at the moment, I tossed the 4.11 set i took out, they were noisey as hell. But if the gear you have fits a 12 bolt we might talk, Thanks Drew

car_fixer

I am waiting to see which fuse goes first, then I will probably have no choice but to fix the other, I do see a cro=mo driveshaft in the future though, what will be in front of it, who knows lol

RAGENZ28

iTrader: (5)

Bad thing though when the drive shaft does break it can damage the pinion or hurt the trans, I've seen trans cases break and pinions bust or break the center section from a broken jammed up drive shaft.

I think there was a post on yellowbullet of some guys aluminum shaft breaking and it busted the tail housing off his trans.

Worse would be launching the car and having it break and putting you into the wall.

car_fixer

Yup, when either one goes, it will suck lol

RAGENZ28

iTrader: (5)

You can always JB weld it back together if you find all the pieces

car_fixer

hey i am in georgia, duct tape and zip ties....and in dire emergency's bubble gum

RAGENZ28

iTrader: (5)

Our hood trapped air and pulled through the fasteners, flew 40 feet in the air around the 1,000 ft mark and landed with a little crack in the corner, we taped it on and the next pass the transmission let go lol.

Now zip ties are a true racers product everyone needs them.

car_fixer

ok, finally got some pics



thats the tie down hooks, and parachute anchor that i added, along with the back brace.
I changed the ring@pinion, but you cant see that lol
this is the cart i built for the track, mostly aluminum, quite light

and this is how the generator is held in, works great

RAGENZ28

iTrader: (5)

Oh I like that cart, good thing you have black paint on your crappy welds How much did the cart cost to make we need something like that to pull kegs of beer around lol.

car_fixer

You will be so tipsy after the beer the low cg wont matter, go to lowes or home depot, 99 bucks, and their welds are even worse than mine. At least i didnt call you for the work on the rear, it would bring a new meaning to the term open rear end

RAGENZ28

iTrader: (5)

We need one with a lil motor we can drive around with a keg on tap

Rear ends and floors weigh too much the car will be lighter without one

I was thinking of cutting off my legs and using hand controls to drop an extra 100 pounds too

rggbly

iTrader: (22)

I'd like to see what that beast is running on healthy parts.

RAGENZ28

iTrader: (5)

I'm sure it'll be fast if it isn't on the bumper ever since he put that souped up noodle grinder 4 cylinder in his car it goes fast

car_fixer

dont forget the fwd conversion

RAGENZ28

iTrader: (5)

I love FWD cars with the big slicks, it just seems so cool. Dude I got braces today, I feel like my teeth grew ****.

car_fixer

OK I broke down and got them...4.56 gears to play on 1/8th mile tracks, putting in tomorrow(thurs) racing friday

RAGENZ28

iTrader: (5)

O cool take some videos

car_fixer

I will have to see if i can get my "fan club" to take some, they usually take still shots but sometimes have a video camera ( one of them got a new dslr and has been trying filters and stuff) this is one he took

the guy in the near lane asked me the next week...what the hell do you have in there ( he used to live down the street from me) I said a 305 lol he said, thats got to be a big block, I had the hood open while he was saying this and i was thinking what a dummy lol

RAGENZ28

iTrader: (5)

You can tell a 305 in a second, it's slow as **** unless it has a big turbo on it lol. So when are you going to step it up and get an 8 second pass? My car money went into my mouth literally, I got braces lol. So my project is sitting collecting dust, I got a bender and have my frame planned out, besides that just waiting for you to sell your car and send me money so I can start mine