MY 94 Z/28 BBC build thread
06-02-2010, 09:40 PM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
MY 94 Z/28 BBC build thread Hello ..Just picked up a 94 Z/28 . i am installing a BBC /T-400 powertrain. Car has BMR front and rear suspension with a 9" . Also has a Wolfe 10 point mly cage ...I will be posting pics as the car progresses..
Engine is a 555 BBC
14.5 to 1 compression with Dart 355 CNC heads , super vic intake and a
Reher morrison 817 lift cam...and a little spray...
Engine is a 555 BBC
14.5 to 1 compression with Dart 355 CNC heads , super vic intake and a
Reher morrison 817 lift cam...and a little spray...
06-02-2010, 09:45 PM
#2
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
couple more pics of the cars progress ...
Engine mockup , header fab , seat installation and master cylinder mounting ,
Headers are 2.250 stepped to 2.375 with a 4" collector.
Engine mockup , header fab , seat installation and master cylinder mounting ,
Headers are 2.250 stepped to 2.375 with a 4" collector.
06-06-2010, 10:35 PM
#4
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Well spent the weekend putting my buddies 72 Chevelle back together , No real progres on the Z...still working on the headers ...did get a chance to start working on the rear fuel cell/ compartment ...pics coming soon...
06-07-2010, 07:04 PM
#6
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
yeah its a 454 block 9.800 deck ..same deck height as my 555 will be ...4,560 bore X 4.250 stroke ...yeah its a little bit of a job for sure ...the mockup is going pretty good ...just building the headers is a major pain...2.250 stepped to 2.375 to a 4" collector ...they are actually coming together pretty well...pics too come this weekend ...
Trending Topics
07-24-2010, 08:50 PM
#11
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Thanks ..LOL ...progress has been a little slow ...Drivers side header is nearly complete ...but another project fell into my lap ...A 95 LT1 .with a 383 stroker and a D1SC procharger here are a couple pics of the header progress and the new whip ..which will be my DD ...it wont run ..looks like the fuel pump ..I have 42 PSI when I key on and it drops to below 20 PSI in about 10 seconds ...
