383backinblack

I have a 91 camaro RS with a 383 stroker, blown with an F1-R procharger.

ive had the car for about 5 years, and it ran 11.8 on the motor back in the day, just started really leaning on the blower setup.

It's got a callies crank, manley 4340 rods, Je pistons, AFR 210CC race ported heads, all comp cams valve train with a solid roller 262/272 and .631 lift, intercooled, meth injected, with a tremec TKO 600 trans, and a moser 12 bolt with 33spline axles......and a bunch of other stuff lol

prostreet1967

iTrader: (1)

heres mine 496 turbo 400 manual valve body 3000 stall 3 inch exhaust dynomax bullets ford 9 in 4.56 gears 33x21.5x15 rear tires

Hot Copper Z

iTrader: (5)

383backinblack,Nice ride,nice times too.

383backinblack

thanks man.......looks like your's is making some steam too

1994z

iTrader: (48)

pictures arent so good.

phoenix67

here is my bbc, a '69 427 tri power.

TTSSZ

iTrader: (8)

Looks killer, I think it needs old style valve covers.

crack3rjack

ive got a carb'd 350 and a 4l60e going in my 95 6cyl bird

78novacaine

iTrader: (2)

i have a little project almost completed. about to pick up a edelbrock 750 carb for it, and after that, all i have left to do is replace the master cylinder and time it. it is a mild build 355 with a hydraulic flat tappet cam (.530-.540ish lift) with gm heads, and a holley street dominator intake. also has hooker l/t headers with no cats, true duals, and flow 40's dumped before the axle. this is going in my 78 nova, witch at full weight weighed in at 3490 with me in it (180 lbs) and a half of a tank of gas. it is original cream colored for now, but we will be laying down a black basecoat shortly, with a dark red sprayed on top of it (unless i change my mind again ran 15.7's on the beat up junkyard stock 350, so we will see what it does with some 275-50-15 drag radials and the new motor, then will be getting gears and a locker unit

JUICED96Z

468 BBC, ran 10.4@136 unknown 60 and a 10.7@136 with a 1.8 60.
Out of the box holley intake and aluminim bow tie heads on a 300 shot and near stock suspension, belt driven water pump, all 80's technology. Car ran BOTTOM 11's on the motor spinning some.

Having the heads and intake race ported, cam matched, suspension.

Car is a fully loaded 83Z with 26k original miles.

JR Newman

440" sbc, Dart block,eagle crank 4", 6.125 rods, w/9" deck, custom CP pistons 15.7:1, Protopline Raised Runner 256cc Heads 23*, Jesel 1.7 shaft rockers, Dart 4500 manifold, AED 1240cfm Dom., Comp. Cams special grind (.800 lift ), jesel belt drive, w/front mount distributer drive, aerospace vacuum pump, csr w/p, stef's oil pan, Lemon 2" headers, Mufflex 4" oval w/ Spintech mufflers, 8"- 6,000 stall -Lupo, th 400, 12bolt 4.30's, cars weighs 3025lbs. w/ driver, best to date 9.19 @148 w/150ft. wheelstand, car will go in the high 8's. Thanks. JR.

Kwikcad500

Well, i started off in the Chevy world and have always had it in my blood...strayed away to the Cadillac power plant for a while and here i am again for good! My ride began life as a daily driver 78 Coupe Deville and has spiraled out of contol to what it is today. Here r some specs fellas..... Its got a 14 to 1 540" rat under the hood, no power adders, no scoop. Dart Big "M" block, 325 Pro 1 heads, Eagle crank and rods, SRP pistons, Jesel S/S rockers, Moroso pan & pump, Cam Motion custom Rollers, Morel lifters, Edelbrock Super Victor with an 150 Dominator on Methenol. Home built T400 with a Rosler brake, 3500 10" converter, 29x11 slicks and 3.70 gears. The car has a full interior, pwr windows/locks/trunk release. Its run an untuned best of 9.85 @ 135 mph with 1.38 60ft times. I've had to slow it down to 10 flat to run my bracket class so i havent really seen what it can do with some tuning. More to come.......

topend

awesome ! u must be spinning that motor to 10,000 rpms with that setup.

camaroboricua

iTrader: (23)

96' T/A with 355 sbc and a t5, mac headers and y pipe...

CamaroKidZ28

70 camaro w/a 454 bored to a 491

Stroked96Bowtie

iTrader: (22)

I have a close to mint 86 C10 with a built 468ci motor. Its still in the works...motor is complete carb to pan...h-beam rods, stock crank, hyper pistons 10.5-1comp, cast 049 heads with stainless 2.19/1.88 valves completely worked by Max Long, 1.7 stainless rockers, comp valve train. Highrise single plane Holley intake with a demon race 750cfm carb.

Behind the motor I have a 700r, 3500 stall hooked to a 12bolt (that needs gears!)

Now I just need time and some help to get it running! Any volunteers

I will be in this section more often...good stuff!

chevyman661

409 inch splayed head 1018 hp n/a , 2002 fire bird stock suspension set up , full cage 25.5 cert , 2757 with me init , et ? The car is almost finished . hoping to run mid 8s on 29.5 10.5 none w . ALL MOTOR

trans_am425hp

iTrader: (1)

1980 trans am. TTP dropped in a gmpp zz383 crate engine, edelbrock performer rpm intake, ported intake runners on aluminum vortec heads, street avenger 770 cfm carb, removed a/c, long tube hedmans, hedman x pipe, custom exhaust with dynomax mufflers, hughes performance th350 trans, hurst quater stick, electric fuel pump set up, full MSD ignition with 6AL box, ladder bars, no rear sway bar, new rear shocks, subframe connectors and threw a few autometers in.

so far, as of today, that whole mess runs. on august 27th it will be track tested
and in a few miles dyno tuned
more to come

redneck01

iTrader: (3)

im currently building a 350 sbc for 550 hp for my t/a. t350 with a tbrake..street car with wheelie bar

AJish

Lookin' good everybody! I've currently got a 1986 Camaro hardtop rolling chassis and a 454ci bbc that I plan on stuffing in it. Nothing really done to it right now, but the winter will definately be full of work to get her done in time for spring.