Project Iroc with Vortec motor UNDERWAY!
#1
TECH Resident
Thread Starter
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Crank is in the machine shop....010"/.010". Heads are going in 2 days for screw-in studs and guideplates and .030" mill with 918 Beehive springs and Precision Race Components Ttanium retainers on there way from Texas Speed and some Summit 1.5 roller rockers. 98 Vortec 350ci Stock Bore 9.8:1 compression. Received FelPro .015" gaskets and Summit rod and main bearing 2 days ago. 3" dynomax bullets came 10 min ago. Hedman Longtubes and Summit 3" X-pipe kit on the way...Should be here this afternoon. Holley Blue pump and Regulator and Wysco billet distributor on the way.
Lunati .510/.525" lift 232/242 @.050" duration on 110 lsa Hydraulic ROLLER cam in my room and a Professional Products Air Gap intake with a 600 Double Pumper for now til I purchase a 750 Mighty Demon.
for a TOTAL cost for everything INCLUDING the car so far= $2050.
includes everything above plus,
Rebuilt WC T5 w B&M Ripper shifter, plus NON WC T5 and B&M SPORT shifter
CenterForce Dual Friction Clutch
Lakewood LCA's
Edelbrock Strut tower brace
5.0 HO Dual snorkle air cleaner
Aftermarket aluminum radiator from local speed shop
Electric fan 4
90% tread "new" tires on the original IROC wheels
....2 months or so and HOPEFULLY she will be up and running and I will have some 1/8 mile times coming for U guys!
Lunati .510/.525" lift 232/242 @.050" duration on 110 lsa Hydraulic ROLLER cam in my room and a Professional Products Air Gap intake with a 600 Double Pumper for now til I purchase a 750 Mighty Demon.
for a TOTAL cost for everything INCLUDING the car so far= $2050.
includes everything above plus,
Rebuilt WC T5 w B&M Ripper shifter, plus NON WC T5 and B&M SPORT shifter
CenterForce Dual Friction Clutch
Lakewood LCA's
Edelbrock Strut tower brace
5.0 HO Dual snorkle air cleaner
Aftermarket aluminum radiator from local speed shop
Electric fan 4
90% tread "new" tires on the original IROC wheels
....2 months or so and HOPEFULLY she will be up and running and I will have some 1/8 mile times coming for U guys!
#6
TECH Resident
Thread Starter
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Keep me informed. I've been watching your progress anyway. I've checked your cardomain a few times. Its too bad about them 292 Turbo castings. I seen all the crap you were catching about them not being that good. Ive seen 292's flow OVER 290cfm. Most guys on here just have NO CLUE! I'd love to see a vortec flow that. It could be done, but WHO is gonna do that.
#7
Staging Lane
iTrader: (1)
Join Date: Sep 2006
Location: rochdale,ma
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
a 650 mighty demon will still be overkill. you would be better off with a speed demon 600 or 650, call up barrygrant /demon and tell them what you have and what your intentions are. i bet they will say the 650 speed demon since the mighty demon hase different venturi,boosters,jetting etc
Trending Topics
#8
In-Zane Moderator
iTrader: (25)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Keep me informed. I've been watching your progress anyway. I've checked your cardomain a few times. Its too bad about them 292 Turbo castings. I seen all the crap you were catching about them not being that good. Ive seen 292's flow OVER 290cfm. Most guys on here just have NO CLUE! I'd love to see a vortec flow that. It could be done, but WHO is gonna do that.
#9
TECH Resident
Thread Starter
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Im STILL waiting on the crank. Im gonna call them tomorrow and see whats going on. Texas Speed STILL does NOT know when the Precision Race Components Titanium retainer will be available. So I STILL dont have my beehives and retainers! DAMN IT! I wish this **** would pick up a little, Im ready! I got all of my exhaust, fuel pump, distributor, etc. Come on already Car Quest and TSP!
#12
#13
TECH Resident
Thread Starter
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The 400 was THAT MUCH FASTER!????
What was the compression of the 355ci? Maybe I need a 383ci or a 406ci then....Damn! Thats quite a bit more than I thought. I am hoping to trap at least 110mph....I "Think" it could go 113 or so if I take out a little weight and all goes well. If all goes well at 3450 I think it could go 111-112 ish....This realistically where I hope to be....What do ya think???
What was the compression of the 355ci? Maybe I need a 383ci or a 406ci then....Damn! Thats quite a bit more than I thought. I am hoping to trap at least 110mph....I "Think" it could go 113 or so if I take out a little weight and all goes well. If all goes well at 3450 I think it could go 111-112 ish....This realistically where I hope to be....What do ya think???
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well it still had the 3.42's which hurt alot and it was about 10.1 ,I just wanted the car running and driving i was a bit disappointed also,
there was a 86 iroc with a 355 ,self ported vortecs,4.10's , rpm intake,compXE274,700r4 that went lo 12's@ around 110, his combo was better matched than mine
there was a 86 iroc with a 355 ,self ported vortecs,4.10's , rpm intake,compXE274,700r4 that went lo 12's@ around 110, his combo was better matched than mine
#17
TECH Resident
Thread Starter
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well crank is STILL at the machine shop. Im giving him 2 weeks then it will go somewhere else. And my titanium retainers are STILL on BACKORDER! I might just go with the steel retainers if I get my crank back soon and am STILL waiting on the titanium retainers.
#18
In-Zane Moderator
iTrader: (25)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Damn, moge, i am in your boat, been waiting on my block for 4 weeks, i have to pick it up FINALLY tomorrow, my rev kit, intake gaskets, hollry black fuel pump and header bolts are STILL not here... I still need to have my bigger springs installled on me heads too!
#19
TECH Resident
Thread Starter
Join Date: Oct 2005
Location: Champaign IL
Posts: 814
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
im tryin the Procomp Blue pump. 60 bucks shipped to my door with regulator off ebay. Wysco billet distributor...60 bucks to my door. We'll see how this junk runs. I expect to dick with timing springs and weights but it all work out for little money if neither the distributor nor the pump take a ****. All new stuff. I only have 2300 invested in all of it including ALL of my my little parts so far. I dont need to spend but another 500 TOPS and I think thats stetching A LOT. Less than about 4500-5000 bucks for a car that WILL run elevens no problem after ported heads are finished and a GForce gear set and an 8.8 hybrid rear with probably a 4.30 gear.
#20
In-Zane Moderator
iTrader: (25)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sweet man, i ordered the pro comp "black" pump, still waiting on it(slow shipping ****** f...) and i can only hope it is a decent part, i have a real holley blue but i thought,"Hell, for that price, i need the nextra fuel now." I will deffinatly be running my fuel pressure gauge up to the winshield of the car under the cowl to monitor pressure.