Mmp This Friday Night!
06-15-2005, 05:44 PM
#5
Moderator
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cablebandit
John wassup with your car?
cutting the top of my hand to the bone. 
I had to get it stitched up. The car is still apart until I get the stitches out. 
John
Trending Topics
06-15-2005, 08:19 PM
#8
Hope ur ok john, thats gotta hurt!!!
Im heading to futral tomorrow to get the TA issues worked out and hopefully i'll be back in time friday night cuz it'll be the last time i can go till about october since im going under the knife tuesday to fix my back. doc says if i dont do the surgery i'll be in pain for the rest of my life cuz my 12th vertebre is pretty much squashed and eventually my spine will turn me into the hunchback of e'prise
!!!
I'll be at Jackson hospital there in montgomery under Dr. Patrick Ryan and Dr. Micheal Davis for 3-5days so yall should swing in and say hi
and then it'll take about 4 months to heal
Im heading to futral tomorrow to get the TA issues worked out and hopefully i'll be back in time friday night cuz it'll be the last time i can go till about october since im going under the knife tuesday to fix my back. doc says if i dont do the surgery i'll be in pain for the rest of my life cuz my 12th vertebre is pretty much squashed and eventually my spine will turn me into the hunchback of e'prise
!!!I'll be at Jackson hospital there in montgomery under Dr. Patrick Ryan and Dr. Micheal Davis for 3-5days so yall should swing in and say hi
and then it'll take about 4 months to heal
06-15-2005, 09:10 PM
#10
Originally Posted by cablebandit
need me to keep your car broken in while you are out? Good luck on the back!!!!!!!
Maybe should let you take it.......Thanks for the well wishes
06-15-2005, 09:41 PM
#11
Moderator
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
Good luck with the back surgery. You need to get it done while you are still young. 
Montgomery is much closer to Enterprise than Jonesboro so I can watch the car. Plus you can drive the car up here and just leave it at my house. I will let it sleep inside with my white car.
Let me know if you are to make it to MMP this Friday and I will make it for no other reason but to watch.
John
Montgomery is much closer to Enterprise than Jonesboro so I can watch the car. Plus you can drive the car up here and just leave it at my house. I will let it sleep inside with my white car.
Let me know if you are to make it to MMP this Friday and I will make it for no other reason but to watch.
John
06-15-2005, 09:45 PM
#12
Moderator
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Greenfire
Glad you are okay John that sounds very painful!
My hand is fine. I think my first post made it sound much worse than it is.
It only took 3 stitches on my knuckle. I just can not turn a wrench.
John
06-16-2005, 01:30 AM
#13
i got it scheduled for friday morning 9:30am so hopefully it wont take any longer than noon to polish up the tuning which could have me in montgomery by 8-9pm i think, maybe sooner. thats enough time for a few runs eh?
BTW, i have a dumb question......I lost the only set of keys i had to my 95Z28 and i've looked everywhere for the last 3 weeks but to no avail so can i just bring the VIN number and proof of ownership to the local chevy dealer to get a new set? If not, how do i get a new set?
BTW, i have a dumb question......I lost the only set of keys i had
to my 95Z28 and i've looked everywhere for the last 3 weeks but to no avail so can i just bring the VIN number and proof of ownership to the local chevy dealer to get a new set? If not, how do i get a new set?
06-16-2005, 08:10 AM
#14
Originally Posted by Wicked_Hugger99
i got it scheduled for friday morning 9:30am so hopefully it wont take any longer than noon to polish up the tuning which could have me in montgomery by 8-9pm i think, maybe sooner. thats enough time for a few runs eh?
BTW, i have a dumb question......I lost the only set of keys i had to my 95Z28 and i've looked everywhere for the last 3 weeks but to no avail so can i just bring the VIN number and proof of ownership to the local chevy dealer to get a new set? If not, how do i get a new set?
BTW, i have a dumb question......I lost the only set of keys i had
to my 95Z28 and i've looked everywhere for the last 3 weeks but to no avail so can i just bring the VIN number and proof of ownership to the local chevy dealer to get a new set? If not, how do i get a new set?Good luck,
Vann
06-18-2005, 01:15 AM
#18
My best run was a 12.966 @ 108.38. I couldn't get her out of the hole really well for some reason. I didn't even run below a 2.0 on 60", even on ET Streets. I really need a stall converter. This stock one just isn't cutting it.
I've got a video of that run actually, and I'll post it up tomorrow, along with an in car vid of me dusting a 05 Mustang.
Fun was had by all. Sorry you couldn't make it Ryan.
I've got a video of that run actually, and I'll post it up tomorrow, along with an in car vid of me dusting a 05 Mustang.
Fun was had by all. Sorry you couldn't make it Ryan.
06-18-2005, 09:44 AM
#19
Here's the videos.
The first one is of me racing Eric, a friend of mine. He has an LT1 with the GM Hotcam, cut-out, most bolt-ons, and it's an M6. If he had sticky tires, he'd probably be beating me. I ran a 12.96 @ 108.38. I didn't realize that the car launches as hard as it does until I watched this video.
Click here to see Video
This one is me racing a stock 05 Mustang GT. I've been wanting to catch a race with one for a while. I pulled really good on it. I ran a 13.2 (with passenger) to his 14.4. I think that he could be running high 13's if he had more practice.
Click here to see Video
The first one is of me racing Eric, a friend of mine. He has an LT1 with the GM Hotcam, cut-out, most bolt-ons, and it's an M6. If he had sticky tires, he'd probably be beating me. I ran a 12.96 @ 108.38. I didn't realize that the car launches as hard as it does until I watched this video.
Click here to see Video
This one is me racing a stock 05 Mustang GT. I've been wanting to catch a race with one for a while. I pulled really good on it. I ran a 13.2 (with passenger) to his 14.4. I think that he could be running high 13's if he had more practice.
Click here to see Video
06-18-2005, 11:35 AM
#20
TECH Enthusiast
iTrader: (2)
Join Date: Nov 2004
Location: San Antonio, Texas
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
It was a blast lastnight, we looked for you Ryan. Too bad you couldn't make it. I'm happy I finnaly got 13's on street tires with my car. LOL, usually I'm hitting 14's if I run street tires on her. HAHAH! Anyways I need to hope onto Jegs and get my MT E/T's.