Pics of Protoype Coil Relocation Kit!
05-09-2006, 11:42 AM
#1
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Pics of Protoype Coil Relocation Kit! NO splicing of factory wiring harness!!! This is the prototype, but the final ones will be similar, but more refined.
This kit will be available with any kind of wire you want.(8mmTaylor, 8.5mm MSD, 10.4mm Taylor)
I will have all the special tools needed to install. The brackets will be polished(standard)
Thanks again to Steve (slt200mph) for trusting me with his nice Camaro. ~Joshua
This kit will be available with any kind of wire you want.(8mmTaylor, 8.5mm MSD, 10.4mm Taylor)
I will have all the special tools needed to install. The brackets will be polished(standard)
Thanks again to Steve (slt200mph) for trusting me with his nice Camaro. ~Joshua
Last edited by FIREHAWK#608; 05-09-2006 at 05:13 PM.
05-09-2006, 11:50 AM
#2
TECH Enthusiast
iTrader: (8)
Join Date: Oct 2004
Location: Half hour north of ATL
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Looks nice Josh....How long would it take someone start-finish to do your kit? Just an average guess would be fine. Good luck with your products, I hope you do well!
05-09-2006, 11:58 AM
#3
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BadAzz96Z28
Looks nice Josh....How long would it take someone start-finish to do your kit? Just an average guess would be fine. Good luck with your products, I hope you do well!
If it was one person with all the stuff, I would take a Saturday and Sunday...drinkin' beer..
05-09-2006, 12:41 PM
#4
Hay Josh..don't you think that it would take less time than that..your kit will eliminate all of the fabrication of the parts of the kit...remember we were starting from scratch...Oh and by the way thanks for posting up the photos of my hand and forearm.. 
... Geeeze.. check that out I finally got my picture on the forum.. did you all recognize me??.. 
... Geeeze.. check that out I finally got my picture on the forum.. did you all recognize me??..
05-09-2006, 01:25 PM
#5
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slt200mph
Hay Josh..don't you think that it would take less time than that..your kit will eliminate all of the fabrication of the parts of the kit...remember we were starting from scratch...:
05-09-2006, 02:04 PM
#7
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slt200mph
yasureubetcha..did you find Jose and get your phone??
I just hope that ***** didn't run up tons of minutes until the battery went dead. I had that phone turned off the next morning.
Trending Topics
05-09-2006, 02:09 PM
#8
TECH Addict
iTrader: (1)
Join Date: Aug 2005
Location: Lawrenceville, GA
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Hey Josh, do you think you could snap some pics of an engine bay with the kit on it showing where the coil packs are re-located to with more emphasis on them? My dad was interested in seeing what the final product looked like. Thanks.
05-09-2006, 02:12 PM
#10
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Out1aw
Hey Josh, do you think you could snap some pics of an engine bay with the kit on it showing where the coil packs are re-located to with more emphasis on them? My dad was interested in seeing what the final product looked like. Thanks.
I just wanted to show a basic timeline of the process. ~Joshua
05-09-2006, 04:54 PM
#12
Deranged Rat Fink
iTrader: (3)
Join Date: Jun 2004
Location: Right here at my laptop, DUH!
Posts: 4,495
Likes: 0
Received 1 Like
on
1 Post
Guys, as much as I hate to be a spoilsport, this is getting into a gray area here . The rules are pretty clear on non sponsor pimping and stating an item is gonna be much cheaper than a sponsor's product is definitely crossing the line a bit . Please keep this to PMs and do not post any pricing or contact info. PSJ or Nineball would not be real thrilled if they saw this. I'm trying to be cool about it so please don't put me in a bad spot over it.
05-09-2006, 05:16 PM
#13
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
I hear ya. Thanks.
I did remove the mention of Thunder on the first post. I never said a price. I only mentioned that I built a better and cheaper mouse trap without giving specifics nor have a solicited business before opening.
I'm walking the line. ~Joshua
I did remove the mention of Thunder on the first post. I never said a price. I only mentioned that I built a better and cheaper mouse trap without giving specifics nor have a solicited business before opening.
I'm walking the line. ~Joshua
05-09-2006, 05:29 PM
#15
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by travisnd
can you still use fuel rail covers after you've relocated the coils?
There are two things that I will include in the disclamers. A.i.r. tubes and FRC's are going to cut down the clearances and make the install impossible.
Hell, if you relocate those coils, minimize the wiring, you can show off those polished/coated/chromed covers with pride. Who needs FRC's?
Can you imagine I put FRC's on my engine?.. it would totally cut down it's appeal.
Once the clutter is gone the LSx is actaully a clean attractive engine to look at. ~Joshua
05-09-2006, 07:12 PM
#17
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Out1aw
Hey Josh, do you think you could snap some pics of an engine bay with the kit on it showing where the coil packs are re-located to with more emphasis on them? My dad was interested in seeing what the final product looked like. Thanks.
05-09-2006, 08:05 PM
#19
Banned
Thread Starter
iTrader: (92)
Join Date: Sep 2004
Location: Atlanta
Posts: 7,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nighttrain 1340
Good job Josh. I might be looking into it when and if I caught up on some other stuff. Randy, 00formula6spd.
I really appreciate you giving me those used tires for me to burn up.
I haven't forgotten... let me know when you feel like doing this project.... ~Joshua
05-09-2006, 08:19 PM
#20
TECH Addict
iTrader: (1)
Join Date: Aug 2005
Location: Lawrenceville, GA
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FIREHAWK#608
Hey David, here's a frontal shot. ~Joshua
That's exactly the pic I needed man! Thanks! Also, will you be able to color-match the brackets to the color of the vehicle?