Southern Members A regional forum for all our down South members.

Thanks Vengeance!!!!

Thread Tools
 
Search this Thread
 
Old 01-23-2007 | 09:34 AM
  #1  
2002BLKWS6's Avatar
Thread Starter
11 Second Club
iTrader: (10)
 
Joined: Mar 2005
Posts: 308
Likes: 0
From: Atlanta
Default Thanks Vengeance!!!!

I Just wanted to say THANK YOU to everyone over at Vengeance!!!
(Ron, Mike, Buddy, Charlie, and anyone else that worked on my car)

I dropped my daily driver off for a cam install yesterday morning, and they were able to get the install completed and tuned within a 12hr time frame, (for which I'm most appreciative) since this is my primary mode of transportation

I'm very happy with my daily driver cam only results
The cam was a small/mild 226/228 114 LSA cam and the last pull with the converter locked it put down 388/362. Thats probably about 370ish unlocked.

The car runs great I'm definitely enjoying the cam

I would say if there is something with your car that you can't do yourself (or if you are planning on paying somebody anyway), definitely give them a call and see if they can help. They offer top notch service and work.

Thanks again,

Nate

Last edited by 2002BLKWS6; 01-23-2007 at 12:18 PM.
Old 01-23-2007 | 10:24 AM
  #2  
METALBEAST's Avatar
12 Second Club
iTrader: (1)
 
Joined: Dec 2003
Posts: 3,027
Likes: 0
From: Cleveland, Georgia
Default

Stout numbers Nate congrats!
Old 01-23-2007 | 10:46 AM
  #3  
BlueThunder2's Avatar
10 Second Club
iTrader: (3)
 
Joined: Nov 2002
Posts: 542
Likes: 0
From: Lubbock,TX
Default

Looks good. Another thumbs up for Vengeance. Can't wait to see how Chris's (HUNTER02SS) car does when they finish it today.
Old 01-23-2007 | 11:33 AM
  #4  
Dre01SS's Avatar
12 Second Club
 
Joined: Jun 2003
Posts: 472
Likes: 0
From: Atlanta, GA
Default

Awesome Nate, glad to hear you're happy!

The Z is going in next week

BTW... The problem you had a last week or so, what was going with that? What was it?
Old 01-23-2007 | 12:00 PM
  #5  
2002BLKWS6's Avatar
Thread Starter
11 Second Club
iTrader: (10)
 
Joined: Mar 2005
Posts: 308
Likes: 0
From: Atlanta
Default

Originally Posted by Dre01SS
Awesome Nate, glad to hear you're happy!

The Z is going in next week

BTW... The problem you had a last week or so, what was going with that? What was it?
Ingnition Lock cylinder went bad... It wasn't reading the Chip on my key, so had to replace the ignition and get two new keys.

It will always be something I guess.

So Dre, what all are you plannning on having done to the Z06?

Last edited by 2002BLKWS6; 01-23-2007 at 12:12 PM.
Old 01-23-2007 | 12:03 PM
  #6  
2002BLKWS6's Avatar
Thread Starter
11 Second Club
iTrader: (10)
 
Joined: Mar 2005
Posts: 308
Likes: 0
From: Atlanta
Default

Originally Posted by METALBEAST
Stout numbers Nate congrats!
Thanks Jeff... I'm happy... more than enough power for me right now
Old 01-23-2007 | 12:20 PM
  #7  
brad8266's Avatar
TECH Senior Member
iTrader: (23)
 
Joined: Aug 2005
Posts: 8,797
Likes: 0
From: Watertown, NY
Default

Good numbers, and good turnaround time by Vengeance.
Old 01-23-2007 | 12:39 PM
  #8  
Dre01SS's Avatar
12 Second Club
 
Joined: Jun 2003
Posts: 472
Likes: 0
From: Atlanta, GA
Default

Originally Posted by 2002BLKWS6
So Dre, what all are you plannning on having done to the Z06?
Glad you got it figured out and taken care of.

Will be doing the same thing you did
Old 01-23-2007 | 12:42 PM
  #9  
2002BLKWS6's Avatar
Thread Starter
11 Second Club
iTrader: (10)
 
Joined: Mar 2005
Posts: 308
Likes: 0
From: Atlanta
Default

Originally Posted by Dre01SS
Will be doing the same thing you did
Cool Man... But I'm sure you will be going with a much bigger cam than me
Old 01-23-2007 | 12:53 PM
  #10  
Dre01SS's Avatar
12 Second Club
 
Joined: Jun 2003
Posts: 472
Likes: 0
From: Atlanta, GA
Default

Originally Posted by 2002BLKWS6
Cool Man... But I'm sure you will be going with a much bigger cam than me
No! Never
Old 01-23-2007 | 01:00 PM
  #11  
2002BLKWS6's Avatar
Thread Starter
11 Second Club
iTrader: (10)
 
Joined: Mar 2005
Posts: 308
Likes: 0
From: Atlanta
Default

Originally Posted by Dre01SS
No! Never
Of course not
Old 01-23-2007 | 04:35 PM
  #12  
KEE AUDIO's Avatar
Banned
iTrader: (65)
 
Joined: Sep 2004
Posts: 2,851
Likes: 2
From: Marietta, GA
Default

Man those are great numbers for a stalled A4!! Vengeance is awesome!!
Old 01-23-2007 | 07:02 PM
  #13  
URBHIND's Avatar
Teching In
 
Joined: Jan 2007
Posts: 15
Likes: 0
From: Woodstock, Ga.
Default

Congrats On The Cam!! Vengeance Turned That Pretty Quick
Old 01-23-2007 | 07:04 PM
  #14  
02 WS6 TA's Avatar
TECH Addict
iTrader: (7)
 
Joined: Mar 2002
Posts: 2,278
Likes: 1
From: Up in the Hills...Down there.
Default

Awesome Nate, congrats!
Old 01-23-2007 | 07:07 PM
  #15  
BLKWS6's Avatar
TECH Veteran
 
Joined: Feb 2002
Posts: 4,049
Likes: 1
From: Loganville, GA
Default

Originally Posted by 2002BLKWS6
I Just wanted to say THANK YOU to everyone over at Vengeance!!!
(Ron, Mike, Buddy, Charlie, and anyone else that worked on my car)

I dropped my daily driver off for a cam install yesterday morning, and they were able to get the install completed and tuned within a 12hr time frame, (for which I'm most appreciative) since this is my primary mode of transportation

I'm very happy with my daily driver cam only results
The cam was a small/mild 226/228 114 LSA cam and the last pull with the converter locked it put down 388/362. Thats probably about 370ish unlocked.

The car runs great I'm definitely enjoying the cam

I would say if there is something with your car that you can't do yourself (or if you are planning on paying somebody anyway), definitely give them a call and see if they can help. They offer top notch service and work.

Thanks again,

Nate

Hmmmmmm......now back when i had that RP setup in an A4 i made 375 with a smaller cam/stall.......hmmmmm....must be in their magic tuning....








































hehehe....Great numbers Nate. Good job as always Ron/Mike (couldnt resist )
Old 01-23-2007 | 07:43 PM
  #16  
Teh Juggernaut's Avatar
TECH Regular
iTrader: (3)
 
Joined: May 2006
Posts: 464
Likes: 0
Default

We should make a stick for this section titled Vengeance!!!! Seems like not a day goes by where they do not get some praise. Maybe one day I will have enough money to buy something from them, being a college student sucks. Do they sell air filters????
Old 01-23-2007 | 07:46 PM
  #17  
Ron@Vengeance's Avatar
FormerVendor
iTrader: (51)
 
Joined: Nov 2001
Posts: 5,628
Likes: 1
From: Cumming GA
Default

Glad you are happy Nate!!! Im glad we exceeded your expectations as well. Please let us know if there is anything we can do for you in the future!!!

Thanx to the rest of you for the support!!!!
Old 01-23-2007 | 07:50 PM
  #18  
2002BLKWS6's Avatar
Thread Starter
11 Second Club
iTrader: (10)
 
Joined: Mar 2005
Posts: 308
Likes: 0
From: Atlanta
Default

Originally Posted by 02 WS6 TA
Awesome Nate, congrats!
Thanks Travis!
Dude, Whens the next time you headed this way, we still gotta go
I missed the last outing when you were up here.
Old 01-23-2007 | 09:31 PM
  #19  
Flawless02SS's Avatar
TECH Fanatic
iTrader: (9)
 
Joined: Sep 2004
Posts: 1,827
Likes: 14
From: Canon, GA
Default

Glad you finally got a cam in Nate. I know you will enjoy the car more now. Your mod list is getting LONG for a daily driver. And you said you where not going to do much to the car, I knew that was a lie !! lol,lol

Congrats bud!
Old 01-23-2007 | 09:40 PM
  #20  
Teh Juggernaut's Avatar
TECH Regular
iTrader: (3)
 
Joined: May 2006
Posts: 464
Likes: 0
Default

Originally Posted by 2002BLKWS6
Thanks Travis!
Dude, Whens the next time you headed this way, we still gotta go
I missed the last outing when you were up here.




Quick Reply: Thanks Vengeance!!!!



All times are GMT -5. The time now is 05:20 PM.