2 MORE DEPOSITS IN OVER THE HOLIDAYS!

I hear there are 2 or 3 more people waiting until after the first.

For anyone on the fence, we are close to getting there.



Shoot me an email at jason@stainlessworks.net with your billing and shipping info and I can get you signed up. OR give me a call at 1.800.878.3635

-Jason

 

COME ON GUYS

I know a couple of you were on the fence not wanting to put a deposit down just in case it didn't happen...

WELL GET ME 3 MORE AND WE ARE BUILDING THESE

 

****... I'll send a deposit Friday.

 

TXMaro just sent me his info. 2 more names with deposits and we can figure out who's truck we're using.

-Jason

S10 LS Swap Header Group Buy List
1. mecanicman
2. Petraszewsky <=PAID DEPOSIT=>
3. SoLow (If they will fit a 1st gen truck)
4. artlsx10 <=PAID DEPOSIT=>
5. lowloudnproud1
6. rpturbo
7. JOER
8. NES10 <=PAID DEPOSIT=>
9. 89gearhead
10. antimatter69 <=PAID DEPOSIT=>
11. JARED -CURRENT PERFORMANCE <=PAID DEPOSIT=>
12. caddyman1961
13. CouJoe56
14. FakeSnake
15. tefoster <=PAID DEPOSIT=>
16. ZQV8 <=PAID DEPOSIT=>
17. TXMaro <=PAID DEPOSIT=>

 

PM...sent...please let me know..Thanks

 

Email sent

 

SOUNDS GOOD

Give me a call at 1.800.878.3635 and I can get your billing info into the system. I can put a note "do not charge until ____"

-Jason

 

Two more pending deposits. Who else needs 304L Stainless headers for their swap?

S10 LS Swap Header Group Buy List
1. mecanicman
2. Petraszewsky <=PAID DEPOSIT=>
3. SoLow (If they will fit a 1st gen truck)
4. artlsx10 <=PAID DEPOSIT=>
5. lowloudnproud1
6. rpturbo
7. JOER
8. NES10 <=PAID DEPOSIT=>
9. 89gearhead
10. antimatter69 <=PAID DEPOSIT=>
11. JARED -CURRENT PERFORMANCE <=PAID DEPOSIT=>
12. caddyman1961
13. CouJoe56
14. FakeSnake
15. tefoster <=PAID DEPOSIT=>
16. ZQV8 <=PAID DEPOSIT=>
17. TXMaro <=PAID DEPOSIT=>
18. Robertvon <=DEPOSIT PENDING=>
19. nycblazer <=DEPOSIT PENDING=>

 

Count me in on a set , let me no how to send deposit

 

Count me in on a set , let me no how to get u deposit

 

Still waiting on a couple guys but more came through over the weekend.

S10 LS Swap Header Group Buy List
1. mecanicman
2. Petraszewsky <=PAID DEPOSIT=>
3. SoLow (If they will fit a 1st gen truck)
4. artlsx10 <=PAID DEPOSIT=>
5. lowloudnproud1
6. rpturbo
7. JOER
8. NES10 <=PAID DEPOSIT=>
9. 89gearhead
10. antimatter69 <=PAID DEPOSIT=>
11. JARED -CURRENT PERFORMANCE <=PAID DEPOSIT=>
12. caddyman1961
13. CouJoe56
14. FakeSnake
15. tefoster <=PAID DEPOSIT=>
16. ZQV8 <=PAID DEPOSIT=>
17. TXMaro <=PAID DEPOSIT=>
18. Robertvon <=DEPOSIT PENDING=>
19. nycblazer <=PAID DEPOSIT=>
20. montecarloss <=PAID DEPOSIT=>
21. truck7man <=PAID DEPOSIT=>

 

LET'S GET THIS ROLLING.

I guess the first step....

We need a truck for R&D

Please post what truck you have along with the modifications, how far you are from Stainless Works, and of course if you can bring it. Unfortunately, we cannot transport your truck for liability reasons.

We are located at:

9899 East Washington St
Chagrin Falls, OH 44023

-Jason

-Jason

 

YES!!! Maybe see if there's any way to make front mount turbo headers fit while your there???? That's what Im going to need. Lets get some trucks in there!

 

Wish I was closer to get mine in there!

 

I had guys volunteering to bring trucks 1000 miles away...where'd the close guys go!?

-Jason

 

??? I'd take mine but I haven't started my swap yet. I thought there were a few trucks nearby being offered up? Where did they go?

 

Im around an hour away but its not exactly what they are looking for since its been completed for over a year now. Currently it has no transmission since Im swapping from t56 to 4l80e. I could offer mine if they don't mind a completed swap but it will be a month or two before the auto swap is completed. t56 is gone but the auto still needs rebuild and have to send the cpw harness out to be converted to auto.

 

so what's going to happen if there's no local volunteers?

 

We have a S10 that happens to be getting its motor pulled for a refresh before race season. Wouldn't be too hard to stick a dummy block and the CPW motor mounts in it.

But more than likely someone will pop up!

 

How far apart does the front end need to be? Entire front clip pulled and would I have to replace my mounts with CPW mounts. Im in akron just found out another s10 swapper the next town over is willing to take me to your shop and back on his flatbed. I don't currently have a trans since Im swapping to an auto from a manual but he also might be able to borrow a 80e case for me to bolt on. I already wouldn't have a ecm and engine harness since those are being sent to CPW to be converted to auto. But Im assuming Id have to lift my engine out to get my current modified from something long tubes out and hope my crossmember notch will still work for cpw mounts since Im also running some kind of fabricated brackets with fbody mounts that I got with the longtubes that I bought from a ls swapped s10 member on another forum.

All in all Im asking how far broken down and torn apart will a truck have to be? I'd love to help out all the other s10 guys since we've been waiting for this opportunity for years but Im limited on time with multiple other projects going on both home remodeling and rebuilding a 80e and swapping that in. Thanks.