Racetronix

iTrader: (2)

Please visit our web page for newly posted information on our C5 plug & play fuel system.

Please support forum sponsors who carry Racetronix product.

Happy New Year!

Racetronix

JoeDirt

Anything for 01 02 fbodys with the plastic tank ??

Racetronix

iTrader: (2)

We do not have a fuel pump solution for the plastic tank f-body cars. We do not have any ETA on it. As soon as there is any new information available we will post it on our web page.

Thank you for your inquiry.

JoeDirt

What would it take to make your 98 ls1 fuel pump work with a 2002 ??

I tried pm but you have them disabled .

Racetronix

iTrader: (2)

Totally different system.

We do have the PnP harnesses for the new cars if someone wants to upgrade the wiring or add a pump booster as a PnP option. Nothing for the plastic module though.

Sonny

iTrader: (1)

I was told that some 99 ls1 (fbody) comes w/ metal tank and that your PnP kit would work w/ it. Or is your kit for 98 only?

Racetronix

iTrader: (2)

Some f-body cars as late as 2000 have metal tanks. They are not very common. In this case the Racetronix system available now will work (P/N RX-F98-FPKG-2). If you have a plastic tank it will not.

Sonny

iTrader: (1)

next question: is there an easy way to find out, like by the VIN codes, etc.?

Racetronix

iTrader: (2)

That is a good question. We will look into this.
In the meantime a magnet or a set of knuckles would be a faster / easier means of determining this.

Time2Kill

iTrader: (49)

So if we have a plastic tank, can we use your PnP wiring to wire up two Walbro intank pumps?

Racetronix

iTrader: (2)

No, but we do have DP harnesses available for this application.
Here is one for the GM CK LS1 application:
http://www.racetronix.com/images/Fue.../Dcp_1317b.jpg

This is almost identical to the f-body harness except for some different lengths.

XLR8NSS

iTrader: (4)

Jack - When you say CK LS1 applications are you talking about the 99+ GM trucks? Have you been holding out on us.

Racetronix

iTrader: (2)

Custom DP systems have been available for the CK platform just as long as the f-body platform. They are almost identical in construction.

XLR8NSS

iTrader: (4)

Do we have to send our plastic bucket deals in to you to be modified or do you have these on the shelf?

Thanks

Racetronix

iTrader: (2)

The module must be sent in unless you want to fork out $3XX for a new one...

XLR8NSS

iTrader: (4)

I think it'll be better to send in.

Thanks for the info.

parish8

iTrader: (6)

there are several of us truck guys that need what you are selling, how about you charge us a $300 deposite on that part till you get our old one back?

Racetronix

iTrader: (2)

Can't do that. Someone might end up with someone else's defective float assembly. Others might have issue with getting an older yellowed module in place of their newer module.

parish8

iTrader: (6)

can i get more info on the DP set up? i dont see it on your web site and i tried calling thunder racing and they said it is only avaliable directly thru you.

how much is it?
what kind of turn around time is there?
how does it work? are one of the pumps staged to come on later and if so what signals it? if not can the truck regulator handle 2 of those pumps?

cobra99vert@aol.com
Jim

Racetronix

iTrader: (2)

Pumps are staged with options for control such as throttle or Hobbs.
System is fully PnP.
Turnaround depends on our work load here. Average is 2-4 weeks full circle. At peak times of the year we do not take any in as these are not a regular production item.