Chris@AP-Engineering

iTrader: (-2)

Due to the demand we have been getting on these we have brought the sale back. Below you will find what you need. The sale will run from today till 2-7-05

LM-1 Air/Fuel Ratio Meter (KIT) $329

Includes: LM1, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide.

LM-1 Kit with AuxBox (LMA-3) $569

Includes: LM1, AuxBox (LMA-3) Input Accessory, Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide

LM-1 Kit with RPM Converter (LMA-2) $409

Includes: LM1, RPM Converter (Aux Input #2), Bosch 5-wire Wideband 02 Sensor, Analog Output Cable, 10ft. Sensor Cable, 10ft. Power Cable (Cig), 6ft. Serial Cable for PC Connection, Bung/Plug Kit, Software CD, and Quick Start Guide

Thanks

skytower31

iTrader: (4)

What would be needed to record the data into HP Tuners if you have the aux. input capabilities on HP Tuners?

Billiumss

iTrader: (11)

Thanks Chris for setting this up!!! I plan on using it with my HP Tuner software.

I'm gonna go out on a limb here, would those prices happen to include the S&H too???

I'll be calling you sometime this week to place my order, heck I might even buy something else too...

Bill


BTW skytower31 - The LM-1 base kit is all you need for HP Tuner

skytower31

iTrader: (4)

So the "LM-1 Air/Fuel Ratio Meter (KIT) $329" is all that is needed? Does the analog output hook up to the HP Tuner box?

matts22

iTrader: (2)

Does this have the ability to log AFR and RPM (with RPM kit) on a laptop using the software CD? I mean, especially for non-computer controlled vehicles.

For my WS6, I would use it with HPTuners, but for other older vehicles, I would like to be able to use it as a stand alone AFR/RPM logger using my laptop. Can you confirm this works? Thanks!

CAT3

iTrader: (9)

Matt, yes. You hook the included WB up, plug into LM-1, and run your rpm signal wire, when you log it will log, using the internal memory (44minutes worth if I remember correctly) you can then DL it into your laptop. And playback in realtime, or frame by frame. The sample rate is pretty damn good too, cant recall OTOMH, but its up there. Well worth it. I use the LM-1 in my car and portability alows me to tune customer cars. Great tool.

Chris- What about a price for the gauge set if you already have an LM-1? I think the analog gauge is out now, and digital should be out soon correct?

Charlie

Chris@AP-Engineering

iTrader: (-2)

I am out at the shop, but if you place the order it will be here in 3-4 days. They have been very good at shipping them the last few orders.

CAT3, I can get the analog gauge for $49, doesn't look like the digital is out yet.

Thanks guy's!

CAT3

iTrader: (9)

Ok, may order with that badass shortblock I am proding the wife to get me for Valentines, if not then will order anyway in the next few days.

Thanks.

Charlie

horist

kickass... I've already got an LM-1 but I'll post this up in the PCM section, several people looking at buying one

Tiger2o69

iTrader: (16)

Ok im not sure what I need but i think its just the lm1.

Basically I want to use it to log in hp tuners but I would also like to have a guage in the pillar pod. Can I do both of these at the same time? What do I need for this? By analog do you mean the guage w/ the green orange red? Can I buy a digital guage from dynotune and it work w/ this?

Sorry for all the questions.

Checkmate

iTrader: (2)

I ordered it.

Phoenix 5.7

iTrader: (7)

what is the shipping cost to Louisiana 70512?

Chris@AP-Engineering

iTrader: (-2)

$15 to get it to you.

Thanks

W8N2SQZ

iTrader: (6)

Okay, so which one of these would someone get if they are just about to order HP Tuners, so everything will work together?

Thanks,
Glenn

matts22

iTrader: (2)

If you are just going to tune with HPTuners, get the regular LM-1. You don't need the rpm converter. But if you're like me and want to be able to use it for tuning older, non-computer controlled vehicles, you will need the rpm converter. I'm waiting to see what the consensus on the LC-1 (no display) is going to be before I buy. If I just knew whether you could log AFR/RPM on a laptop with it (since it has no display), then I would know whether to wait or buy the LM-1.

Billiumss

iTrader: (11)

$15.00 to ship it???

According to UPS, if they pick it up at your place, if it weighs 2 lbs and if the box size is 12x12x12, UPS is saying it should cost $5.57 to my zip of 43004.

Chris@AP-Engineering

iTrader: (-2)

They are coming from Innovate to you. Their in California and they charge a drop ship fee. That is where the $15 comes from.

Thanks