Cobra's are fast...
#22
#24
I finally get up to his door.. Cobra owner looks over and smiles.. I'm sitting in my SS with a terrified look on my face, thinking to myself "WTF MIKE! Are you an idiot! ITS A ******* COBRA!!! You coulda just stayed back and kept your dignity.. But NO!"
We both slow down to 40.. He down shifts and I hear his supercharger scream.. Great! I'm racing a friggen jet!!
Ehhh. Even if he was pulley/ported I doubt spray would even the playing field totally.
#25
Honorable loss and good post.
Races like this always seems to make the mod bug bite hard.
-----------------------------------------------------------------------------
01' Black WS6 M6 - Lid, P&P TB, P&P Weiand Intake, Pacesetter LT's, True Duals, LS7 clutch, 4:10s, 226/232, UD pulley, STB, SFC's, Upper & Lower PHBs, TA, LCAs, Relocation Brackets, & Strano Springs, . 385/360. 12.25 @ 115
-----------------------------------------------------------------------------
Hmmmm.....mine is about 2 seconds and 20mph faster than your car in the 1/4 mile. You need to run a Cobra that has a pair of *****. Stop picking on stock cars.
Races like this always seems to make the mod bug bite hard.
-----------------------------------------------------------------------------
01' Black WS6 M6 - Lid, P&P TB, P&P Weiand Intake, Pacesetter LT's, True Duals, LS7 clutch, 4:10s, 226/232, UD pulley, STB, SFC's, Upper & Lower PHBs, TA, LCAs, Relocation Brackets, & Strano Springs, . 385/360. 12.25 @ 115
-----------------------------------------------------------------------------
Hmmmm.....mine is about 2 seconds and 20mph faster than your car in the 1/4 mile. You need to run a Cobra that has a pair of *****. Stop picking on stock cars.
Last edited by unit213; 06-06-2010 at 08:21 PM.
#26
My buddy has an '04 GT that he just put a KB on. He hasn't gotten a tune yet but I'm way to scared to even **** with him. Not until I get a few more mods lol.
#27
#28
Why would you think that? His car makes what 350Rwhp? An average pulley Cobra is making 450+Rwhp. His car traps what? 110-112mph? Average pulley Cobra traps 118-122mph. So yes, a pullied Cobra could *** rape him that bad.
You ran into a half *** decent one on the highway yet? I got a buddy with a ported/pullied Cobra.. Don't worry though, he only makes 515Rwhp/530Rwtq.. Only running bottom 11s @ 122+mph... Slow, right? You are calling Cobras slow but yet run BARELY faster than what a stock Cobra runs. Awesome man.
385/360. 12.25 @ 115
You ran into a half *** decent one on the highway yet? I got a buddy with a ported/pullied Cobra.. Don't worry though, he only makes 515Rwhp/530Rwtq.. Only running bottom 11s @ 122+mph... Slow, right? You are calling Cobras slow but yet run BARELY faster than what a stock Cobra runs. Awesome man.
385/360. 12.25 @ 115
I seriously just laughed out loud....very good post Lemons.
#29
**nevermind lol... i'm a little sauced up tonight!
#30
KUDOS.....as fast cars that I've had, there's always been a faster one just around the corner...you never know till you try and that you did. I got bounced by one in the V the other day, and the "JET" thing....I'm still laughing cause I know how it is...I did get about a 2 length kill on a GTO yesterday...you win and you lose...thumbs up for tryin
#31
Some local guys I know had a LS1 Fbody versus bolton/pullied/ Cobra contest last year. He finally walked the Cobra after he put a 150shot on ontop of his full boltons.
One of the few cars out there that requires a LS1 Fbody to more or less match there dyno numbers in order to take them in a roll race. Not many cars can say that- even most of the lighter turbo imports can't make that claim!
Last edited by Sticks n Stones; 06-06-2010 at 09:59 PM.
#32
Respectable loss bro!
Mod up and try again. Thats the name of the game.
Hell I raced a 76 mm Turbo Cobra just the other night and got beat. Not by as much as I thought, But he also put down 700whp. I only put down somewhere in the viciity of 500whp.
Ask me how I beat him by 1/4 car and I'll tell you IDFK. lol Well it was by default. hahaha - He went to grab the next gear and I pulled 1/4 car. But I thought he let out (and I let off of it), apparently he didn't let up though. :oops: My mistake.
And then the 2nd race, he beat me by about a 1/2 to 1 car. I let out b/c we were coming up on traffic about 1/4 mile ahead and I didn't wanna get trapped in a situation that could get dangerous for either of us.
Here are my vids if you don't mind...
View Video on FQuick
View Video on FQuick
Mod up and try again. Thats the name of the game.
Hell I raced a 76 mm Turbo Cobra just the other night and got beat. Not by as much as I thought, But he also put down 700whp. I only put down somewhere in the viciity of 500whp.
Ask me how I beat him by 1/4 car and I'll tell you IDFK. lol Well it was by default. hahaha - He went to grab the next gear and I pulled 1/4 car. But I thought he let out (and I let off of it), apparently he didn't let up though. :oops: My mistake.
And then the 2nd race, he beat me by about a 1/2 to 1 car. I let out b/c we were coming up on traffic about 1/4 mile ahead and I didn't wanna get trapped in a situation that could get dangerous for either of us.
Here are my vids if you don't mind...
View Video on FQuick
View Video on FQuick
#33
#34
Nice death OP. I always wanted to run a termi, only got to run what I though was one that turned out to be a bone stock automatic GT with the full body kit on it. I dragged him about as hard as that guy did to you, 15+ cars by the top of 4th (I was making 450rwhp, him maybe 230ish?).
#35
Took me the mods in my sig(granted im about 500+lbs more then an fbody and 200-300 more then an 03 cobra to hang door to door with a pullied/long tube cobra until 4th when i started to creep away.
Pullied cobras are no joke, they are 119-120mph cars with good drivers....way too much for a bolt on LS1 to handle. Good try though.
Pullied cobras are no joke, they are 119-120mph cars with good drivers....way too much for a bolt on LS1 to handle. Good try though.
#36
#37
I wouldnt mess with a ported blower cobra or above. But had my share of races with pullied and stock (exhaust cobra). If you race a cobra on a high roll like 50 forget about it.. lol they can jump good (pullied & tuned). What i did is take him for a 20 roll and bang the gears. Hold him off by half a car the whole way. Those cobra are just animals..lol
#39
Some local guys I know had a LS1 Fbody versus bolton/pullied/ Cobra contest last year. He finally walked the Cobra after he put a 150shot on ontop of his full boltons.
One of the few cars out there that requires a LS1 Fbody to more or less match there dyno numbers in order to take them in a roll race. Not many cars can say that- even most of the lighter turbo imports can't make that claim!
One of the few cars out there that requires a LS1 Fbody to more or less match there dyno numbers in order to take them in a roll race. Not many cars can say that- even most of the lighter turbo imports can't make that claim!
I wouldn't worry about it then... I would guess 400Rwhp max without a very good curve. I could be wrong though, I'm not a mustang guru by any means.. Just enough to get me by.
#40
Hahahaha. I cant wait to have a piece. They do roll out tho!