Street Racing & Kill Stories Basic Technical Questions & Advice

Chevelle/ cobra rematch and saw a cammed ZR1 run a fox

Thread Tools
 
Search this Thread
 
Old 03-20-2011, 01:42 AM
  #1  
11 Second Club
Thread Starter
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,357
Received 21 Likes on 17 Posts

Default Chevelle/ cobra rematch and saw a cammed ZR1 run a fox

Made some trips out of the states for the weekend. Buddy in the white cobra (ported blower, pulley, exhaust, tune, etc) wanted to play again now that he has a working limited slip. Unfortuneately I had been too lazy earlier to put on the drag radials but I figured "what the hell"

We lined up with a flagger, he got the jump on me and we both started struggling for traction. He was on some almost bald Nitto DRs. He got about a car out before I finally got it to somewhat hook.

I think he was hazing his tires still because I stopped his pull until he grabbed third, then he started running like a freight train...slow pull at first then steamrolling away from me. Ended up getting out on me at least 3-4 cars and pulling before I let out.




The real show was a cammed (don't know what else) ZR1 who ran a nice foxbody with a decent 351 on nitrous. Poor ZR1 was smoking the tires and on and off the rev limit through the 1/8th running door to door with the fox then finally missed a gear and just gave up. Fox wouldn't run again...hopefully next weekend they line up a rematch. I'd like to see a better run.

Federales rolled in and bullshitted for a while, they were cool as hell though. Eventually they just rolled out without harrassing anyone about anything.

Overall it was a pretty good night. Going to need to start putting my camera in the car though.
Old 03-20-2011, 02:57 AM
  #2  
11 Second Club
iTrader: (9)
 
LS1rob00's Avatar
 
Join Date: Apr 2010
Location: Bay Area, CA
Posts: 978
Likes: 0
Received 0 Likes on 0 Posts

Default

Sounds like a damn good time. Tell Mr. ZR1 to get himself some tires though!
Old 03-20-2011, 07:12 AM
  #3  
Captain Double Post
iTrader: (2)
 
BOBS99SS's Avatar
 
Join Date: Jun 2010
Location: Elyria Ohio
Posts: 1,622
Likes: 0
Received 2 Likes on 2 Posts
Default

I'm happy winter is almost over here in Ohio so we can all get back to fun stuff,car shows,runs,etc good runs man for sure next time grab the camera
Old 03-20-2011, 08:01 AM
  #4  
registered user
iTrader: (3)
 
ScreaminRedZ's Avatar
 
Join Date: Oct 2005
Posts: 2,940
Received 0 Likes on 0 Posts

Default

700 rwhp and street tires...priceless

Good run against your buddy's Cobra! What do you have planned next for your car?
Old 03-20-2011, 10:48 AM
  #5  
11 Second Club
Thread Starter
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,357
Received 21 Likes on 17 Posts

Default

Guy in the Cobra is going to assist me in porting some 799s, then I'm going to send them to the machine shop for a valve job and mill .015-.020 and put them on.
Old 03-21-2011, 08:30 AM
  #6  
11 Second Club
Thread Starter
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,357
Received 21 Likes on 17 Posts

Default

Got some more info on the fox.

Last night we put on some fresh M/T 275/60 on the Cobra and he raced the black fox. It's a 351 with ~12.5:1 compression, ported aluminum heads, large cam, and running race gas. Has a supposed 175hp shot on it too.

Out of the hole he caught better than the cobra, got out 2 cars by the time the cobra caught and hit 2nd gear. They held even until ~90 when the cobra went around him hard.

Fox said he knocked it into neutral. From where I was it looked like he hit his brakes early when he saw he was going to get passed then put it in neutral and revved.


The fox and his friends keep insisting my car can't run better than high 12s "because that motor runs 13.0 in a fbody, not way he picked up 8 tenths or more in a 4000lb car". Jackasses. Apparently my 12.24 time slip and witnesses aren't good enough either...
Old 03-21-2011, 09:10 AM
  #7  
12 Second Club
iTrader: (13)
 
WSsick's Avatar
 
Join Date: Apr 2008
Location: St. Peters, MO
Posts: 2,418
Likes: 0
Received 3 Likes on 3 Posts
Default

Sounds like the fox guy is a douche between not running the ZR1 again, that little stunt during the run, and calling BS on your times.
Old 03-21-2011, 09:32 AM
  #8  
11 Second Club
Thread Starter
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,357
Received 21 Likes on 17 Posts

Default

Yeah, he has been telling people all week the cobra is a 12.5-12.9 car and his fox runs 11.3 ON MOTOR so it wouldn't even be a race.

Yet his *** was about to get handed to him on spray if they ran the whole 1/4, that damn cobra pulls like crazy from 3rd up (since it actually hooks 100% from there). I'm trying to get him to go to the track with us though to shut him up.

He did remind me my g/f took a video of my 12.24 pass I never got around to pulling from her phone so I'm going to do that and post it up on the local forum and here. Not sure if she recorded the light board so hopefully the announcer said something about it.

If not **** him, with some tweaks my next track trip should include some 11.90s for him to chew on.
Old 03-21-2011, 10:01 AM
  #9  
12 Second Club
iTrader: (13)
 
WSsick's Avatar
 
Join Date: Apr 2008
Location: St. Peters, MO
Posts: 2,418
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by thunderstruck507
If not **** him, with some tweaks my next track trip should include some 11.90s for him to chew on.
Best choice. Invite him out to watch if he won't run.
Old 03-21-2011, 10:06 PM
  #10  
Teching In
 
69chevelleSS's Avatar
 
Join Date: Nov 2010
Location: Mississippi
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

That's impressive times for your engine work. That auto helps a lot to though. Get some vids next time I wanna see that mustang get its *** waxed.
Old 03-21-2011, 10:58 PM
  #11  
TECH Addict
 
It'llrun's Avatar
 
Join Date: Aug 2002
Location: N. FL
Posts: 2,708
Likes: 0
Received 0 Likes on 0 Posts

Default

11.3's on motor with a 351W isn't unheard of, but its well built if that happens. Sounds like an 1/8th mile runner rather than 1/4 mile.
Old 03-22-2011, 09:14 AM
  #12  
11 Second Club
Thread Starter
iTrader: (18)
 
thunderstruck507's Avatar
 
Join Date: Mar 2008
Location: Northwest AR
Posts: 8,357
Received 21 Likes on 17 Posts

Default

I don't question the engines abilities, but the point was he was claiming to run that fast on motor and then was about to get drug (while spraying) by a car he spouted wouldn't break mid 12s or better.

I have no idea what his car runs.
Old 03-25-2011, 06:27 AM
  #13  
12 Second Club
iTrader: (3)
 
Brando5641's Avatar
 
Join Date: Apr 2010
Location: NW Arkansas
Posts: 248
Received 1 Like on 1 Post

Default

Sounds like an ex honda owner...




All times are GMT -5. The time now is 06:25 PM.