Holy crap those new 5.0's are fast!!!
#281
10 Second Club
Join Date: Oct 2007
Location: Royal Palm Beach FL.
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
No doubt about that...I guess the build quality of my buddy's Turboed Mach (that I routinally *** whip) is'nt the same. His 63k driver's seat is just flat wore out.....my seat has 108k and is just slightly patinaed. Not to mention when ya drop the hood to shut it the whole frontend shakes.
#284
10 Second Club
iTrader: (8)
Thats interesting, my Mach has 97,000 miles and the build quality is excellent. Since the hood is fiberglass and has a big hole in the middle it does shake when you shut it. Mine has a stock 4.6 stock cams, stock manifolds, stock auto trans, all with 96,000 miles and I couldn't be closer to your car, my best is 11.16@124 so not all cars are the same. I had a 94' Formula and I had my own parking space in the Pontiac dealers service bay. I would still buy a Vette though. Any new car is a crapshoot if your gonna have problems or not.
#285
I read this thread and see lots of asshurting...
The 5.0 mod is a impressive engine for stock and Ford has had many years to perfect it. I would not count GM out yet though. You can bet they have a new engine in the works or a variation of the ls to put them back on top.
The 5.0 mod is a impressive engine for stock and Ford has had many years to perfect it. I would not count GM out yet though. You can bet they have a new engine in the works or a variation of the ls to put them back on top.
#286
Teching In
Join Date: Oct 2010
Location: Jonesboro, Arkansas
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#287
Launching!
Join Date: Apr 2010
Location: Greenhaven/ South Sacramento 'Burbs
Posts: 203
Likes: 0
Received 1 Like
on
1 Post
No doubt about that...I guess the build quality of my buddy's Turboed Mach (that I routinally *** whip) is'nt the same. His 63k driver's seat is just flat wore out.....my seat has 108k and is just slightly patinaed. Not to mention when ya drop the hood to shut it the whole frontend shakes.
#288
In-Zane Moderator
iTrader: (25)
That's surprising. It's pretty easy to figure out. The cars that run shitty typically just do power mods. The ones that run good do both power mods and chassis/suspension mods. For example, there are a few ported Eaton Cobras that run 9's (serious suspension mods, auto, weight reduction, etc) and there are ported Eaton Cobras that run 12's (stock suspension, wrong tires, bad tune potentially, etc). It's all about the setup, not just sound and power...and let's not forget about driver ability.
#289
I read this thread and see lots of asshurting...
The 5.0 mod is a impressive engine for stock and Ford has had many years to perfect it. I would not count GM out yet though. You can bet they have a new engine in the works or a variation of the ls to put them back on top.
The 5.0 mod is a impressive engine for stock and Ford has had many years to perfect it. I would not count GM out yet though. You can bet they have a new engine in the works or a variation of the ls to put them back on top.
From what I've read, the only engine really "in the works" is the 5.5L(which may be any CI for production) and while it will be good, I'm not convinced it will out-perform the 5L if both go DI. From the looks, the 5.5 will be DI from the start no matter the cubes(maybe 5.7L?). The 5L is also prepared for DI already, so we'll have to see what they come up with later.
I'm expecting the GT500 to use the 5L soon(maybe next yr as a 2013), with DI. Otherwise, it's the only platform for the 5.4L anymore. I think they're simply using up stock before the changeover. The other option is the one serious Ford fans are frothing at the mouth over... 6.2L.
#291
I had a hard time getting my LS6 swap with bolt ons hooking with the stock suspension at 40 MPH on street tires. Did some suspension stuff and it would hook just fine. Still needed DR's from a dig but it damn sure made a difference from a low roll. Maybe you just experienced some roaches.
#293
In-Zane Moderator
iTrader: (25)
I had a hard time getting my LS6 swap with bolt ons hooking with the stock suspension at 40 MPH on street tires. Did some suspension stuff and it would hook just fine. Still needed DR's from a dig but it damn sure made a difference from a low roll. Maybe you just experienced some roaches.
#294
10 Second Club
iTrader: (8)
I had a hard time getting my LS6 swap with bolt ons hooking with the stock suspension at 40 MPH on street tires. Did some suspension stuff and it would hook just fine. Still needed DR's from a dig but it damn sure made a difference from a low roll. Maybe you just experienced some roaches.
#295
Are you completely retarded? You can't just slap on parts and be fast. Supercharged 4.6s depend on amount of boost on how they run, gear ratio, driver's skill, weight of car, tune, etc etc...
#296
On The Tree
Join Date: Jul 2009
Location: Folsom, CA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
I don't get the whole "many years" thing... This is the 1st year Ford has used it in any production vehicle. It isn't like GM hasn't had many years as well... 4.6 Northstar, for like 2 decades now. GM isn't "not" on top... They'll run out of cubic inches at some point, which explains the blower. If 638hp isn't enough from the factory, whoever thinks that should open their own manufacturing plant, then build and sell their own cars...
That's funny. When I had my 96 Cobra I literally slapped my Vortech H.O. kit on it, added a mid-pipe/cat-back and hand held tuner and went from 14s too 12s the first time down the track. You make it sound way too technical. In reality boosting a 4.6 is not rocket science. lol
Last edited by Demon 383; 04-27-2011 at 08:35 AM.
#297
That's funny. When I had my 96 Cobra I literally slapped my Vortech H.O. kit on it, added a mid-pipe/cat-back and hand held tuner and went from 14s too 12s the first time down the track. You make it sound way too technical. In reality boosting a 4.6 is not rocket science. lol
#298
On The Tree
Join Date: Jul 2009
Location: Folsom, CA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Sheesh don't know what you're talkin' bout. 12's were movin' for 1996. Especially for a car that averaged bottom 14's stock and had virtually no aftermarket at the time.
#300
On The Tree
Join Date: Jul 2009
Location: Folsom, CA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts