raced a z28 last night in the wifes 2v GT
#81
11 Second Club
Join Date: Jul 2010
Location: E-town raceway
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
If my memory serves correctly, the 03 Cobra/Mach/Marauder/Aviator all have the same intake lobes where as the 96-98 Cobra/99/01 Cobra share the same profile.
The 99/01 Cobra, 03 Cobra/Mach/Marauder/Aviator share the same exhaust lobe of .390. The 96-98 lobes slightly higher (.394").
Can't believe I still remember this stuff.
I hope you don't believe 5M Mach's only produce 305hp at the flywheel.
#82
10 Second Club
iTrader: (8)
No ****.....then why did you and stopsign start with the name calling???? Practice what you type. Maybe I should've asked "Can you comprehend?"....but I could answer that one for ya myself.
#83
#85
***Repost Police***
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
Exactly my point... so the 14.2 is also affected by bad air. That car in decent DA would have definitely been in the 13s. And btw, a 1.91 60' with drag radials is kinda bad.
I'm not sure what you look at/read, but it's pretty well known that a stock PI GT is a 98-100mph trapspeed car. The '99 and '01 Cobras actually weren't that much faster as far as ET is concerned, but generally trapped 3-5 faster.
I'm not sure what you look at/read, but it's pretty well known that a stock PI GT is a 98-100mph trapspeed car. The '99 and '01 Cobras actually weren't that much faster as far as ET is concerned, but generally trapped 3-5 faster.
#86
#88
Registered User
Join Date: May 2011
Location: Brevard,Florida
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
13.2 - 13.3 01 COBRA
Your average mach puts down around 270-280rwhp stock but with cold air intake,intake manifold spacer 1/2"-1",full exhaust its around 310-320rwhp.
Last edited by 4valvemach; 05-20-2011 at 06:37 PM.
#90
10 Second Club
iTrader: (2)
http://www.modularfords.com/forums/s...k-times-needed.....
#93
Registered User
Join Date: May 2011
Location: Brevard,Florida
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
http://www.musclemustangfastfords.co...672/index.html
mach1 60ft and 1/4 time
http://www.mach1registry.com/FAQ.htm#quartertimes
2001 svt cobra 60ft and 1/4 time
http://www.svtperformance.com/forums...le-et-mph.html
#94
11 Second Club
Join Date: Jul 2010
Location: E-town raceway
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
So the legend himself Mr. Evan Smith holds the stock Mach 1 record at 13.13@105.5. That same guy took two LS1 F-bodies to high 12s, 12.8x@108.9 in a Z28 and 12.89@108 in a loaded SS in the heat. That guy can really row those gears.
#96
11 Second Club
Join Date: Jul 2010
Location: E-town raceway
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
#97
#98
#100
TECH Senior Member
iTrader: (71)
So under .3 and right at 3 mph difference. If that isn't a drivers race, I don't know what is??
And for some reason it seems like way more people pushed bone stock fbodys to break records than they did with the mach 1 or 01 cobra. I wouldn't imagine anyone would best Smiths times but would be nice to see some backed up times.
And for some reason it seems like way more people pushed bone stock fbodys to break records than they did with the mach 1 or 01 cobra. I wouldn't imagine anyone would best Smiths times but would be nice to see some backed up times.